Samsung SF-515 Setting the time and date, Press or ❿ until ‘TIME/DATE SETUP’ appears, then press

Page 28

Setting the time and date

The current time and date are shown on the display when the machine is on and ready for use (standby mode). The time and date are printed on all faxes you send.

Note: If power to the machine is cut off for over 30 minutes, when power is restored, the machine prompts you to reset the time and date.

1.Press Setup. The display shows the first setup menu; FAX NUMBER/NAME.

2.Press ➛or ❿ until ‘TIME/DATE SETUP’ appears, then press

Start/Enter. The display asks you to choose a date format.

3.Press Start/Enter.

4.Press ➛or ❿ until you find the desired date format, then press

Start/Enter.

If you select USA, the time and date appears in the order of month, day, then year. The EUROPE format will be displayed in the order of day, month, then year.

The display shows the currently set time and date using the selected date format.

25-06-2002 12:30	(‘Europe’ type)

5. Enter the correct time and date using the number keypad.

Day	= 01~31
Month	= 01~12
Year	= four digits
Hour	= 00~23
Minute	= 00~59

You can also use ➛ or ❿ to move the cursor under the digit you want to correct, then enter a new number.

6.Press Start/Enter when the time and date on the display is correct.

If you enter an invalid number, the machine beeps and does not pro- ceed to the next step. If this happens, just reenter the correct number.

The display shows the time and date you have set, then returns to Standby mode.

25-JUN 12:30 FAX

2.7 Getting started

Image 28

Contents User’s Guide Trademark Notices Contents Receiving a fax Making a copyOther functions Automatic diallingTroubleshooting MaintenanceImportant safety information Precautions Safety notes SymbologyInstallation Unpacking TAM lead * UK OnlyControl locations and functions Front viewRear view Setting up your machine Choosing a locationDocument tray Paper exit trayDocument exit tray Telephone lineAC power cord Extension phone optionalInstalling the toner cartridge Installation Loading paper Insert the paper with the print side facing you Paper type and size Getting started Using the control panel One-touch dialSetup Using the number keypad Entering alphanumeric characters Keypad Character Assignments Editing numbers or name Entering numbersInserting pause Setting up your fax number and name Press Start/Enter when the name on the display is correctPress or ❿ until ‘TIME/DATE SETUP’ appears, then press Setting the time and dateEnter the correct time and date using the number keypad Adjusting volume Ringer volumeSpeaker volume Alarm volume/Key volumeBasic operation Sending a fax Preparing documents for faxing or copyingResolution Setting document resolution and contrastContrast Loading document Cancelling transmission Sending a fax automaticallyConfirming transmission Automatic redialReceiving a fax Receiving modesReceiving Manually in TEL Mode Receiving automatically in FAX modeDistinctive ring pattern detection Drpd Receiving in Auto mode Receiving automatically in ANS/FAX modeReceiving manually using an extension telephone Copying overview Making a simple copyPress or ❿ to choose YES or no Advanced copy featuresPress Copy or Start/Enter to begin the copy operation Redial To redial the number last calledTo search through redial memory Press and hold Redial/Pause for 2 secondsSending a recall Monitoring a dual job statusOne-touch dialling Storing a number for one-touch diallingEditing a number for one-touch dialling Sending a fax using a one-touch numberIf you do not want to assign a name, skip this step Speed dialling Storing a number for speed diallingPress and hold Speed for 2 seconds Enter the number you want to store, then press Start/EnterSending a fax using a speed number Editing a number for speed diallingSearching sequentially through the memory Searching for a number in the memorySearching with a particular first letter Memo