Samsung SF-515 manual Editing a number for speed dialling, Sending a fax using a speed number

Page 46

Editing a number for speed dialling

1.Press and hold Speed for 2 seconds.

2.Enter the 2-digit location number where the phone number you want to edit has been stored, then press Start/Enter. The display shows the number.

TEL:025413000

3.Press ➛or ❿ to move the cursor to the desired number and edit the number. When you complete editing, press Start/Enter.

Note: When you press the speed dial number stored for group dial, the display briefly shows ‘G-REGISTERED’ to indicate that the number is used for group dial, then you can edit the number.

Sending a fax using a speed number

1.Load a document that you want to send by fax.

2.Press Speed, then enter a 2-digit speed dial location number.

3.Press Start/Enter to dial the number. The number will be automatical- ly dialled, then the document will begin to be transmitted when the remote fax machine answers the phone.

3.16 Basic Operation

Image 46

Contents User’s Guide Trademark Notices Contents Other functions Receiving a faxMaking a copy Automatic diallingTroubleshooting MaintenanceImportant safety information Precautions Safety notes SymbologyInstallation Unpacking TAM lead * UK OnlyControl locations and functions Front viewRear view Document tray Setting up your machineChoosing a location Paper exit trayDocument exit tray Telephone lineAC power cord Extension phone optionalInstalling the toner cartridge Installation Loading paper Insert the paper with the print side facing you Paper type and size Getting started Using the control panel One-touch dialSetup Using the number keypad Entering alphanumeric charactersKeypad Character Assignments Editing numbers or name Entering numbersInserting pause Setting up your fax number and name Press Start/Enter when the name on the display is correctPress or ❿ until ‘TIME/DATE SETUP’ appears, then press Setting the time and dateEnter the correct time and date using the number keypad Speaker volume Adjusting volumeRinger volume Alarm volume/Key volumeBasic operation Sending a fax Preparing documents for faxing or copyingResolution Setting document resolution and contrastContrast Loading document Confirming transmission Cancelling transmissionSending a fax automatically Automatic redialReceiving a fax Receiving modesReceiving Manually in TEL Mode Receiving automatically in FAX modeDistinctive ring pattern detection Drpd Receiving in Auto mode Receiving automatically in ANS/FAX modeReceiving manually using an extension telephone Copying overview Making a simple copyPress or ❿ to choose YES or no Advanced copy featuresPress Copy or Start/Enter to begin the copy operation To search through redial memory RedialTo redial the number last called Press and hold Redial/Pause for 2 secondsSending a recall Monitoring a dual job statusOne-touch dialling Storing a number for one-touch diallingEditing a number for one-touch dialling Sending a fax using a one-touch numberIf you do not want to assign a name, skip this step Press and hold Speed for 2 seconds Speed diallingStoring a number for speed dialling Enter the number you want to store, then press Start/EnterSending a fax using a speed number Editing a number for speed diallingSearching sequentially through the memory Searching for a number in the memorySearching with a particular first letter Memo