MENU SCREEN 6
The daylight savings mode and search dial and jog dial operation mode are set on Menu Screen 6.
!8Selecting the daylight savings mode Select the daylight savings mode.
ON: The daylight savings mode is selected.
OFF: The daylight savings mode is not selected.
!9Setting the start time for the daylight savings mode
Set the week, month and hour at which the daylight savings mode is to start.
WEEK: Select 1ST, 2ND, 3RD, 4TH or LST (last) and one of SUN through SAT.
MONTH: Select the starting month (1 Ð 12).
TIME: Select the start time (1:00 Ð 22:00)*.
Do not adjust the time setting between 23:00 and 1:00 during the daylight savings period.
@0Setting the end time for the daylight savings mode
Set the week, month and hour at which the daylight savings mode is to end.
WEEK: Select 1ST, 2ND, 3RD, 4TH or LST (last) and one of SUN through SAT.
MONTH: Select the ending month (1 Ð 12).
TIME: Select the end time (1:00 Ð 22:00)*.
@1Search dial and jog dial direct operation mode Set the operation mode when the search dial or jog dial is to be used from another mode.
ON: The dial can be operated directly during STOP and STILL.
OFF: The dial can be operated after the STILL button is pressed.
* Minutes are for reference only and cannot be adjusted.
MENU SCREEN 7
The
@2Setting the bit length (7BIT/8BIT)
@3Setting the stop bit
@4Setting the parity bit (ODD/EVEN/NON)
@5Setting the baud rate (4800BPS/9600BPS)
@6Selection of the menu display language
(ENGLISH/FRANCAIS)
* The underline denotes the factory setting.
CAUTIONS:
¥The menu screens are not displayed while the unit is playing back a tape.
¥While the unit is recording, the contents of Menu Screen 1 can be changed; however, Menu Screens 2 to 7 are for reference only and therefore cannot be changed.
11