Timer Recording
There are two methods of timer recording: one uses the internal timer and the other uses an external timer.
Internal Timer Recording
Start time and stop time
Bear in mind the following points when setting these times.
•When the stop time is set later than the start time: Recording will commence at the start time on the day concerned and stop at the end time on the same day. Example: 8:30 → 17:00
•When the start time is set later than the stop time or the start time and stop time for weekly record- ing (weekly timer) are the same:
Recording starts at the start time on the day con- cerned and ends at the stop time on the following day. Example: 17:00 → 8:30
•When the start time and stop time are the same (for weekly recording):
Recording starts at 8:30 on the day concerned and ends at 8:30 on the following day.
Example: 8:30 → 8:30
To record for an entire day, set the start time and stop time to 0:00.
¥Weekly recording (weekly timer) can be set by the day of the week.
¥When (INTERNAL TIMER REC) on Menu Screen 5 is set to OFF for both the weekly timer and daily recording (daily timer), nothing appears for the start or stop time. Timer recording is considered not to be set.
Internal timer recording operation
qCheck that a video cassette with its tab intact has been inserted.
wCheck that the TV monitor shows the correct pres- ent time.
e Set the MENU/REC LOCK switch to MENU to display the menu screens. Press the page button so that the INTERNAL TIMER REC timer setting screen appears on the TV monitor.
[INTERNAL TIMER REC] P5
[TIMER]START END
MON OFF
TUE OFF
WED OFF
THU OFF
FRI OFF
SAT OFF
DLY OFF
VTR operations after the settings
¥The unitÕs power is turned off, and even if other but- tons are pressed, their operations are not accepted.
¥When the start time and stop time have not been set, INT flashes on the display.
Releasing the internal timer mode
Set the TIMER MODE switch to OFF to clear INT on the display.
Note:
¥Since it takes some moments for recording to start, set the start time for timer recording one minute earlier.
rSet the operation times of the internal timer.
¥For details on the settings, refer to the sections on ÒDaily timerÓ or ÒWeekly timer.Ó (See page 17.)
tUpon completion of the settings, set the MENU/ REC LOCK switch to OFF. The regular screen is restored.
ySet the TIMER MODE switch to INT TIMER so that INT lights on the display.
When the time and date for Menu Screen 1 have not been set, a cassette has not been inserted, the timer has not been set, or when a cassette with a broken out tab has been inserted, the buzzer sounds and INT flashes on the display.
16