Panasonic AG-RT850P manual RS-232C Interface, DUB 9-pin connector specifications

Page 23

RS-232C Interface

1. Outline of RS-232C interface

This interface is for enabling the basic functions of the VTR to be operated using a personal computer.

¥The D-SUB 9P connector is used to connect the VTR with the personal computer.

2.Hardware specifications

■D-DUB 9-pin connector specifications

¥ Connector:

D-DUB 9P, female

¥Compatible cable: Straight cable

D-SUB 9P input signals

Pin No.	Abbreviation	Circuit name	Details

1	CD (DCD)	Carrier detection	PC receives this signal.

2	RD (RXD)	Received data	PC receives data.
3	SD (TXD)	Transmitted data	PC sends data.

4	ER (DTR)	Data terminal ready	PC sends this signal.

5	SG (--)	Signal ground	Signal ground
6	DR (DSR)	Data set ready	PC receives this signal.
7	RS (RTS)	Request to send	PC sends this signal.

8	CS (CTS)	Clear to send	PC receives this signal.

9	CI (RI)	Ring indicator	PC receives this signal.

PC

Pin No.

1

2

3

4

5

6

7

8

9

Pin No.

Details

1L: ground

2 Data output

3 Data input

4 OP (ready output)

5GND

6Ready output (OP)

7

8(short)

9L: ground

VTR

23

Image 23

Contents Operating Instructions Do not Open FCC NoteContents Regular Maintenance Service Recommendation FeaturesRegular inspections recommended Routine inspection procedureRoutine & Regular Inspection Request Action taken after routine inspectionsParts and Their Functions 5Tracking -, +/V-LOCK button 6RESET button8TIME Mode , buttons @1ALARM display lampAC in connector Camera switching output connectorAudio input/output connectors Video input/output connectorsMenu Screens 5Video signal mode Alarm recording duration setting0Alarm recall see 1Terminal connector output signal setting@0Setting the end time for the daylight savings mode 9Setting the start time for the daylight savings modeDate and Time Settings Time/Date Display Position TIME/DATE display position adjustment functionL24 hours Time Mode SelectionTape type Mode Recordable time Hours 160 L18 hoursTips For Better Recording Recording ProcedureRecording Mode Lock Before power is restored After power is restoredInternal Timer Recording Timer RecordingSAT on 800 L24 DLY on 800 L18 Daily Recording Daily Timer/Weekly Recording Weekly TimerAuto Repeat Recording/Auto Rewinding External Timer RecordingExternal timer recording operations Connecting the Alarm Input Connector Alarm Recording Emergency RecordingPrinciple of Alarm Recording Alarm and Display Methods during Alarm RecordingAlarm Recall Alarm Recording OperationTime Lapse VTR AG-RT850 Frame Switcher Connection and RecordingConnections using the WJ-FS616 WJ-FS616Tracking Playback ProcedureVertical Hold Adjustment RS-232C Interface DUB 9-pin connector specificationsExplanatory description ¥ Command receive verificationExample ¥ Response messageCommand Command parameter Completion message Interruptible Table of commandsTime mode request command Time mode switching commandCounter data request command ID request commandAutomatic send setting command ACK return status request commandAll status request command Time setting commandTrouble with recording TroubleshootingTrouble with installation Trouble with functions or operationTrouble with playback Input/Output Terminal Signal Level SpecificationsPage Security & Digital Imaging Company