Arcam E-2 manual Welcome to the AV8 Preamp Processor, Contents

Page 3

Welcome to the AV8 Preamp Processor

USING THIS HANDBOOK

Thank you for purchasing the Arcam FMJ AV8 Preamp Processor.

This handbook has been designed to give you all the information you need to install, connect, set up and use the Arcam FMJ AV8 Preamp Processor. The remote control handset supplied with the equipment is also described.

It may be that the AV8 has been installed and set up as part of your Hi-Fi installation by a qualified Arcam dealer. In this case, you may wish to skip the sections of this handbook dealing with installation and setting up the unit. Use the Contents list to guide you to the relevant sections.

SAFETY

Safety guidelines are set out on page two of this handbook.

Many of these items are common sense precautions, but for your own safety, and to ensure that you do not damage the unit, we strongly recommend that you read them.This is a class 1 product and requires an earth connection.

INTRODUCTION

The AV8 is a high quality and high performance home cinema processor and audio pre-amplifier built to Arcam’s traditional high quality design and manufacturing standards. It combines high resolution digital processing with high performance audio and video components to bring you an unrivalled home entertainment centre.

The AV8 allows quality switching and volume control of eight analogue and seven digital sources making it an ideal companion for both home cinema and two-channel stereo systems. Since many of these source components are also capable of outputting high quality video signals, the AV8 includes broadcast quality video switching for composite, S- video, component and RGB video signals.There are inputs and outputs for both tape and VCR, as well as a digital output. DVD-Audio and SACD can be connected via the multichannel input. Control of the AV8 is either by front panel control buttons, IR remote control or an RS232 port (which can be used to upload future software enhancements).

On the back panel there are trigger outputs for easy connection to associated equipment. The AV8 can easily be integrated with various types of power amplifiers and loudspeakers, including those that are THX certified. The AV8 is itself THX certified, meaning it has passed the rigorous THX Ultra2 specification enabling it to reproduce THX Surround EX signals from Dolby Digital soundtracks.

The customised installation of the AV8 in a listening room is an important process which requires care at every stage. For this reason, the installation information is very comprehensive and should be followed carefully.

The AV8 has a universal input power supply that is compatible with mains voltages between 85V AC and 265V AC, 50Hz to 60Hz.

CONTENTS

Safety guidelines

E-2

Safety instructions

E-2

Safety compliance

E-2

Welcome to the AV8 Preamp Processor

E-3

Installation

E-4

Positioning the unit

E-4

Notes about connections

E-4

Cables

E-5

Speaker Installation

E-5

Audio connections

E-6

Zone 2 connections

E-7

Video connections

E-7

Control connections

E-8

Trigger outputs

E-8

Connecting to a power supply

E-9

Configuring the AV8

E-10

Basic Setup

E-11

Advanced Setup

E-14

Front panel controls

E-17

Remote control

E-18

Operating your AV8

E-19

Using the controls

E-19

Using the main menu screen

E-21

Using zone 2

E-23

Surround modes

E-24

Introduction

E-24

Two-channel source modes

E-24

Multichannel sources

E-25

Multichannel source modes

E-25

THX® Modes

E-25

DSP Effects Modes

E-26

About THX® cinema processing

E-26

Troubleshooting

E-27

Technical specifications

E-30

Additional technical information

E-31

SCART connections

E-32

IR remote codes

E-33

AV8 serial programming interface

E-34

Utility software

E-41

Guarantee

E-42

On line registration

E-42

Manufactured under licence from Dolby Laboratories, Inc.

‘Dolby’, ‘Pro Logic’, ‘Surround EX’ and the double-D symbol are trademarks of Dolby Laboratories.

Copyright © 1992–1999 Dolby Laboratories, Inc. All rights reserved.

Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942, 5,956,674, 5,974,380, 5,978,762 and other world-wide patents issued and pending.

“DTS”, “DTS-ES Extended Surround” and “Neo:6” are trademarks of Digital Theater Systems, Inc.

Copyright © 1996, 2000 Digital Theater Systems, Inc. All Rights Reserved.

English

Lucasfilm and THX are trademarks or registered trademarks of Lucasfilm, Ltd. Copyright © Lucasfilm Ltd. &TM.

Surround EX is a jointly developed technology of THX and Dolby Laboratories, Inc. and is a E-3trademark of Dolby Laboratories, Inc. All rights reserved. Used under authorization.

Image 3
Contents Page Safety guidelines Important Safety InstructionsSafety Compliance Welcome to the AV8 Preamp Processor ContentsAudio InstallationPositioning the Unit VideoCables Speaker InstallationDigital Output Audio ConnectionsAnalogue Audio Inputs Analogue Record Outputs Digital Audio InputsVideo Connections Zone 2 ConnectionsHigh Quality Component Video Connections RGB 4-wire connectionControl Connections Trigger OutputsPlugging Connecting to a Power SupplyWrong PLUG? Mains LeadConfiguring the AV8 Basic Setup General SettingsSpeaker Sizes Distance measurements for 5.1 Speaker delay settings Speaker Delay SettingsLevel Settings Subwoofer SettingsBoundary Gain Compensation THX SettingsSaving Settings and Exit Setup Save SetupADV 1 Speaker EQ Advanced SetupADV 2 Video Settings ADV 3 Digital SettingsADV 4 Zone 2 Settings Enabled sources are listed on the ‘Access’ line of the OSDADV 5 Input Trims Saving Settings and Exiting Setup THX. Selects between the available THX modes Front panel controlsSource selection Remote controlOperating your AV8 Using the ControlsEFFECTS/FX Volume ControlHeadphones Stereo DirectUsing the Main Menu Screen Pro Logic II Music Mode Control VIA Zone 2 Menu Using ZoneDifferent volume level from the main zone zone CR80 remote controlSurround modes IntroductionTWO-CHANNEL Source Modes Multichannel Sources Multichannel Source ModesTHX Modes THX Standards DSP Effects ModesAbout THX Cinema Processing THX TechnologyTroubleshooting No zone 2 audio when playing DTS film Source switching changes randomly or freezes on one sourceUnable to alter settings in Setup Menus Feedback when making digital recordingUnable to adjust bass and treble controls Unable to adjust balance controlBalance is not available in THX mode Continual Improvement Policy Technical specificationsRadio Interference Processing Component SpecificationsLocking the Setup Menu Additional technical informationScart Connections Scart RGB cable with audio back to processorScart S-video cable with audio back to processor IR Remote Codes Table of Remote CodesExample for programming Display = RC-5 code Setting Values Query CommandsCommand Processing THX ?THX PWRMUT EFF ?EFFMain Menu Commands General Operation CommandsBasic Speakers Setup Commands BasicBasic Delay Basic GeneralBasic THX Basic SubSetup Commands Advanced Navigation Engineering SettingsMenu Access Multi-button PressesAV8 Programmer Utility SoftwareClaims Under Guarantee GuaranteeWorldwide Guarantee Warranty Covers