SETUP COMMANDS – BASIC
Basic General
| Command | Parameters |
| Description | |||
| VDS | VDSy |
| Volume Display | |||
| MXV | zMXVy |
| Max Volume | |||
| MXO | zMXOy |
| Max On Volume | |||
| DYU | DYUy |
| Delay Units | |||
| OMD | OMDy |
| OSD Mode | |||
| VST | VSTy |
| Video Status | |||
| HQV | HQVy |
| HQ Video | |||
| SYG | SYGx |
| Sync On Green | |||
Basic Speakers |
|
| |||||
| Command |
|
| Parameters |
| Description | |
|
|
|
| ||||
| AST |
|
| ASTy |
| Auto Setup | |
| SSZ |
|
| SSZsy |
| Speaker Size | |
| 5P1 |
|
| 5P1y |
| 5.1 Rears | |
|
|
|
|
|
|
|
|
Basic Delay |
|
|
| ||||
| Command |
|
| Parameters |
| Description | |
|
|
|
| ||||
| DLY |
|
| DLYsy |
| Speaker Delays | |
|
|
|
|
|
|
| |
Basic Levels |
|
|
| ||||
| Command |
| Parameters |
| Description | ||
|
|
| |||||
| LVL |
| LVLsy |
| Speaker Level settings | ||
|
|
|
|
|
|
|
|
Parameter values
ymay have the values 0 to 2, as follows:
0 = Normal, 1 = dB ref, 2 = Fine.
ymay have a value in the range
ymay have a value in the range
ymay have the values 0 to 2, as follows:
0 = Imperial, 1 = Metric, 2 = Time.
ymay have the values 0 to 1, as follows:
0 = Full Page, 1 = Mixed.
ymay have the values 0 to 1, as follows:
0 = Scart, 1 = Screen Control.
ymay have the values 0 to 1, as follows:
0 = RGB, 1 = Component.
Parameter values
ymay have the values 0 to 5, as follows:
0= THX, 1 = THX SurrEX, 2 = Config. 1, 3 = Config. 2, 4 = Config. 3, 5 = Custom. y may have the values 0 to 2, as follows:
0= None, 1 = Small/Present, 2 = Large.
ymay have the values 0 to 2, as follows:
0 = SurrL/R, 1 = SurrBackL/R, 2 = Both.
Parameter values
y may have a value in the range below, depending on the chosen delay units:
Imperial: 0 to 117 feet in 1ft steps
Metric: 0 to 12.7 meters in 0.1m steps
Time: 0 to 105 milliseconds in 1ms steps
Parameter values
ymay have a value in the range
English