Arcam E-2 manual Technical specifications, Continual Improvement Policy

Technical specifications

Audio

Line input sensitivity (set to Reference)	2V rms
Input impedance	10kΩ
Preamp output level (nominal)	2V rms
Output impedance	25Ω
Signal/noise ratio (unwtd 20Hz–20kHz) – analogue	>100dB
Signal/noise ratio (unwtd 20Hz–20kHz) – digital (24-bit)	>98dB
THD+N – analogue	0.0012%
THD+N – digital (24-bit)	0.0015%
Headphone maximum output level into 600Ω	5V p-p
Output impedance	5Ω
Video inputs and outputs
Input and output impedance	75Ω
Composite video level	1V
HF response to (–3dB)	12MHz
S-video level (Y/C)	1V / 0.28V
HF response to (–3dB)	12MHz
HQ (component) video
level (Y / Cr / Cb)	1V / 0.5V / 0.5V
level (R / G / B)	1V / 1V / 1V
HF response to (–3dB)	300MHz
Digital inputs
Coaxial connection (level/impedance)	0.5V/75Ω
Acceptable sampling frequencies, all inputs	44.1kHz, 48kHz, (and 96kHz stereo only)
Digital output
Output level/impedance	0.5V/75Ω
Sampling frequency in ADC output mode	44.1kHz
Trigger outputs
Output D.C. voltage (excl. RGB status)	12V ±1V
Allowable load	30mA max (min 400Ω)
Remote inputs and output
Signal	modulated 36kHz carrier
Coding	Philips RC-5
General
Mains voltage range	85V to 265V
Power consumption	35VA
Power consumption (standby)	32VA
Dimensions Width x Depth x Height (including feet)	433mm x 360mm x 130mm
Weight (net)	9kg
Weight (packed)	14kg
Supplied accessories	Mains lead, CR80 remote control, 2 x AA batteries
E&OE

NOTE:All specification values are typical unless otherwise stated.	CONTINUAL IMPROVEMENT POLICY
	Arcam has a policy of continual improvement for its products. This
	means that designs and specifications are subject to change without
	notice.

E-30

E-30