Arcam E-2 manual General Operation Commands, Main Menu Commands

GENERAL OPERATION COMMANDS

Command	Parameters	Description	Parameter values
PWR	?zPWRx	Power on/off
MUT	?zMUTx	Mute on/off
FAN	zFANx	Force Analogue
EFF	?EFFy	Effect Mode Selection	y may have the values 0 to 7, as follows:
			0 = off, 1 = music, 2 = party, 3 = club, 4 = hall, 5 = sport, 6 = church, 7 = next
			effect.
THX	?THXy	THX Mode Selection	y may have the values 0 to 4, as follows:
			0 = Off, 1 = THX Cinema, 2 = THX Ultra2 Cinema, 3 = THX MusicMode, 4 =
			THX SurrEX.
DEC	?DECy	Decode/Downmix Mode Selection	If Audio Signal Type is Analogue or PCM, y may have the values 0 to 6 as follows:
			0 = Mono, 1 = Stereo, 2 = Pro Logic II Movie, 3 = Pro Logic II Music, 4 = Pro Logic,
			5 = Neo:6 Cinema, 6 = Neo:6 Music.
			If Audio Signal Type is Digital Surround (Dolby or DTS), y may have the values 0 to
			2 as follows:
			0 = Mono Downmix, 1 = Stereo Downmix, 2 = No Downmix.
DIS		VFD Display
RES		Restore Preset
INF		Current Source information (on OSD)
SIG	?zSIG	Current Audio Signal Type
STS	?zSTS	Zone Status. Displays current state of
		Audio,Video,Volume, Mute, Audio Signal
		Type, *Decode/Downmix Mode, *Effect
		Mode, *THX Mode.
		* Zone 1 only
TRM	TRMsy	Trim Levels	y may have a value in the range -10to +10:
			-10= –10dB
			+10 = +10dB

MAIN MENU COMMANDS

Command	Parameters	Description	Parameter values
VOL	?zVOLy	Volume	y may have a value in the range -53to +19:
			-53= –53dB
			+19 = +19dB
PRE	PREy	Preset Select	y may have a value in the range 1 to 5.
AUD	?zAUDi	Audio source selection
VID	?zVIDi	Video source selection
VDT	VDTy	Video Type	y may have the values 0 to 1, as follows:
			0 = 4:3, 1 = 16:9.
DIR	?DIRix	Stereo Direct
BAL	BALy	Balance	y may have a value in the range -10to +10:
			-10= +10dB to Left
			+10 = +10dB to Right
RCT	RCTi	Record To Tape Select
RCV	RCVi	Record To VCR Select
COM	COMy	Compression	y may have the values 0 to 2, as follows:
			0 = Off, 1 = Medium, 2 = High.
LIP	LIPy	Lip Sync Control	y may have a value in the range -1to +44:
			-1= –5ms
			+44 = +220ms
DIM	DIMy	Pro Logic II MusicMode Dimension	y may have a value in the range 0 to 6.
CTW	CTWy	Pro Logic II Music Mode Centre Width	y may have a value in the range 0 to 7.
PAN	PANx	Pro Logic II MusicMode Panorama
HED	HEDz	Headphone Out

E-36

E-36