Four-Channel Digital Video Recorder
Date/Time Setup
Highlight Date/Time in the Main menu and press the 
button. The Date/Time setup screen appears.
Figure 25 — Date/Time setup screen.
CAUTION: If you set a date and time that is older than some of your recorded images, any images with dates and times later than the new setting will be deleted.
Highlight the first box beside Date/Time and press the 
button. The individual sections of the date highlight. Use the arrow buttons to adjust the numbers. Once you have the correct date, press the 
button.
Highlight the second box beside Date/Time and press the 
button. The individual sections of the time will highlight. Use the arrow buttons to adjust the numbers. Once you have the correct time, press the 
button.
NOTE: The clock will not start running until you have restarted the unit, so you may wish to set the time last.
Highlight the box beside Time Zone and press the 
button. Select the time zone you are in from the list and press the 
button.
Highlight the box beside Daylight Saving Time and press the 
button. Pressing the 
button toggles between On and Off.
Highlight the Holiday Setup… box and press the 
button. You can set up holidays by highlighting Add: and pressing the 
button. The current date appears.
Highlight the month and day and change them by using the arrow buttons. Press the 
button to add the date. Dates can be deleted by highlighting the X beside the date and pressing the 
button.
NOTE: Holidays that do not fall on the same date each year should be updated once the current year’s holiday has passed.
17