Mitsubishi Electronics DX-TL4U manual Time-Lapse Record Setup screen

Page 43

Four-Channel Digital Video Recorder

Pressing the PANIC button on the front panel enters the Panic Recording mode. You can program the recording speed, quality and duration when the DVR is in the Panic Recording mode. On Panic Recording Speed can be set from 0.5 to 30 ips (25 ips PAL), and On Panic Recording Quality can be selectable from Very High, High, Standard and Low. On Panic Recording Duration can be set from 5 to 60 minutes. The panic recording will be stopped automatically according to the preset duration as long as the PANIC button is not pressed to stop the panic recording. Select No Limit if you want to stop panic recording manually.

NOTE: When the DVR is in the Panic Recording mode, it ignores the time-lapse or event recording settings and follows the panic recording settings.

NOTE: The maximum panic recording speed is 30 images per second (25 ips for PAL) when the resolution is set to Standard. However, when set to High, the recording speed will be decreased to 15 images per second (12.5 ips for PAL).

NOTE: When the DVR is in the Panic Recording mode, the REC LED on the front panel flickers and the displays on each camera screen.

Highlight the first box beside Auto Deletion. Pressing the button toggles between On and Off. When set to On, the DVR will delete video recorded earlier than user-defined period. Highlight the second box beside Auto Deletion, and press the button to select the length of time recorded data will be kept from 1 to 99 Days.

NOTE: When the End Of Disk is set to Stop, DVR will NOT restart recording even when the video recorded earlier than user-defined period is deleted.

You can save your changes by highlighting OK and pressing the button. Selecting Cancel exits the screen without saving the changes.

Time-Lapse Record Mode Setup Screen

Figure 47 — Time-Lapse Record Setup screen.

Highlight the box under the Speed heading and press the button. A drop-down list of recording speeds appears. You can select from 0.5 ips to 30 ips (25 ips for PAL).

33

Image 43
Contents Page Page Compliance Notice of FCC Cleaning Important SafeguardsTable of Contents Clip Copy Load Default Setup OSD On-Screen Display Setup Main Monitoring Setup ScreenPTZ Mode Digital Zoom Mode Load / Save Setup Clear All DataList of Illustrations Alarm In Event Action Record setup screen User’s Manual Viii Introduction FeaturesTechnical Overview Connecting the Video Source InstallationPackage Contents Required Installation ToolsConnecting Audio Connecting the Loop Through VideoSetting Unit for Cvbs or VGA output Connecting Alarms Connecting the MonitorConnecting the Spot Monitor AI 1 to 4 Alarm Connecting to the Network PortAlarm Out Factory Reset Connecting to the RS-232C PortConnecting the Power Cord Connecting to the USB PortFront Panel Controls ConfigurationPanic Button Infrared Remote Control Connecting the Infrared Remote ControlInitial Unit Setup Turning on the PowerSetup Screen Four-Channel Digital Video Recorder System Information Normal Setup ScreenSystem Information Change screen System Upgrade screen Date/Time setup screen Holiday Setup screen Four-Channel Digital Video Recorder System Check Config. screen System Check Alarm Out / Notify screen M.A.R.T. Setup screen System Log screen Camera Setup Screen Configuring Input DevicesPTZ Device list Motion Detector setup screen Text-In Setup screen Text-In Generic Text Setup screen Alarm Out setup screen Alarm Out Schedule screen RS232 setup screen Record Mode Setup Screen Configuring Recording SettingsTime-Lapse Record Setup screen Time-Lapse Recording Schedule screen Pre-Event Record Setup screen Alarm In Event Action Record Setup Screen Event Action SetupAlarm In Event Action Alarm Out setup screen Motion Detector Event Action Record setup screen Motion Detector Event Action Alarm Out setup screen Text-In Event Action Record setup screen Text-In Event Action Alarm Out setup screen Video Loss Event Action Record setup screen Video Loss Event Action Alarm Out setup screen OSD On-Screen Display Setup Display SetupFour-Channel Digital Video Recorder Main Monitoring Setup screen Network Setup Screen LAN Manual Setup screen LAN Setup ScreenPort Number Setup screen LAN Dhcp Setup screen Modem Setup screen Dvrns Setup screen Callback Center LAN Setup screen Callback Center Modem Setup screen Password setup screen Password Setup ScreenClip Copy Config ScreenUSB Flash Memory Disk Partition Selection screen Load / Save Setup screen Load / Save SetupUser’s Manual Live Monitoring OperationLive Monitoring Text-In screen PTZ ModePTZ Menu Recording Video Preset Apply screenPlaying Recorded Video Recording AudioArrow Buttons Digital Zoom screen Searching VideoDate/Time Search screen Date/Time SearchEvent Log screen Event Search by Event screen Text-In Log screen User’s Manual Preparing the USB-IDE hard disk drive in Windows Appendix a USB Hard Disk Drive PreparationUser’s Manual Query Example Appendix B Text-In Query ExamplesQuery Example Problem Possible Solution Appendix C TroubleshootingInput Output Appendix D Connector Pin OutsAppendix E Map of Screens Video Appendix F SpecificationsStorage Weee Waste Electrical & Electronic Equipment