Mitsubishi Electronics DX-TL4U manual Dvrns Setup screen

Page 62

User’s Manual

DVRNS (DVR Name Service) Setup Screen

You can register the DVR on the DVRNS server to use DVR name service.

Figure 70 — DVRNS Setup screen.

Highlight the box beside Use DVR Name Service and press the button to toggle between On and Off.

Highlight the box beside DVRNS Server and enter the IP address or domain name of the DVRNS server.

NOTE: You will need to get the IP Address or domain name of the DVRNS Server from your network administrator.

NOTE: You can use the domain name instead of IP address if you already set up the DNS Server during the LAN Setup.

Highlight the box beside Port and enter the port number of the DVRNS server. The port number can be set from 10000 to 12000.

NOTE: The DVRNS server settings on your DVR should match the settings on the registered DVRNS server. Any changes on the DVRNS server might cause improper operation.

Highlight the Use NAT box and press the button to toggle On and Off.

NOTE: When using the NAT (Network Address Translation) device, refer to the NAT manufacturer’ instructions for the proper network settings.

Highlight the box beside DVR Name and press the button to name the DVR to be registered on the DVRNS server. A virtual keyboard allows you to enter the DVR name.

Selecting Check allows you to check whether or not the name you entered can be used.

NOTE: The DVR name you entered should be checked by selecting Check, otherwise the DVRNS changes will not be saved.

52

Image 62
Contents Page Page Compliance Notice of FCC Important Safeguards CleaningTable of Contents OSD On-Screen Display Setup Main Monitoring Setup Screen Clip Copy Load Default SetupLoad / Save Setup Clear All Data PTZ Mode Digital Zoom ModeList of Illustrations Alarm In Event Action Record setup screen User’s Manual Viii Features IntroductionTechnical Overview Required Installation Tools InstallationPackage Contents Connecting the Video SourceSetting Unit for Cvbs or VGA output Connecting the Loop Through VideoConnecting Audio Connecting the Spot Monitor Connecting the MonitorConnecting Alarms Alarm Out Connecting to the Network PortAI 1 to 4 Alarm Connecting to the RS-232C Port Factory ResetConnecting to the USB Port Connecting the Power CordConfiguration Front Panel ControlsPanic Button Connecting the Infrared Remote Control Infrared Remote ControlSetup Screen Turning on the PowerInitial Unit Setup Four-Channel Digital Video Recorder Normal Setup Screen System InformationSystem Information Change screen System Upgrade screen Date/Time setup screen Holiday Setup screen Four-Channel Digital Video Recorder System Check Config. screen System Check Alarm Out / Notify screen M.A.R.T. Setup screen System Log screen Configuring Input Devices Camera Setup ScreenPTZ Device list Motion Detector setup screen Text-In Setup screen Text-In Generic Text Setup screen Alarm Out setup screen Alarm Out Schedule screen RS232 setup screen Configuring Recording Settings Record Mode Setup ScreenTime-Lapse Record Setup screen Time-Lapse Recording Schedule screen Pre-Event Record Setup screen Event Action Setup Alarm In Event Action Record Setup ScreenAlarm In Event Action Alarm Out setup screen Motion Detector Event Action Record setup screen Motion Detector Event Action Alarm Out setup screen Text-In Event Action Record setup screen Text-In Event Action Alarm Out setup screen Video Loss Event Action Record setup screen Video Loss Event Action Alarm Out setup screen Display Setup OSD On-Screen Display SetupFour-Channel Digital Video Recorder Main Monitoring Setup screen Network Setup Screen LAN Setup Screen LAN Manual Setup screenPort Number Setup screen LAN Dhcp Setup screen Modem Setup screen Dvrns Setup screen Callback Center LAN Setup screen Callback Center Modem Setup screen Password Setup Screen Password setup screenConfig Screen Clip CopyUSB Flash Memory Disk Partition Selection screen Load / Save Setup Load / Save Setup screenUser’s Manual Operation Live MonitoringPTZ Mode Live Monitoring Text-In screenPTZ Menu Preset Apply screen Recording VideoRecording Audio Playing Recorded VideoArrow Buttons Searching Video Digital Zoom screenDate/Time Search Date/Time Search screenEvent Log screen Event Search by Event screen Text-In Log screen User’s Manual Appendix a USB Hard Disk Drive Preparation Preparing the USB-IDE hard disk drive in WindowsUser’s Manual Appendix B Text-In Query Examples Query ExampleQuery Example Appendix C Troubleshooting Problem Possible SolutionAppendix D Connector Pin Outs Input OutputAppendix E Map of Screens Appendix F Specifications VideoStorage Weee Waste Electrical & Electronic Equipment