Mitsubishi Electronics DX-TL4U manual Text-In Setup screen

Four-Channel Digital Video Recorder

The Motion Detection Zone screen is laid over the video for the selected camera. You can set up motion detection zones by selecting or clearing blocks. The menu on the setup screen has the following functions:

NOTE: You can activate or deactivate 4 cells at a time using the button. Once 4 cells are highlight, you can select individual cells by using the camera buttons.

Exit with save — Closes the menu after saving the changes.

Exit without save — Closes the menu without saving the changes.

Select All blocks — Activates all blocks to detect motion.

Clear All blocks — Deactivates all blocks so that they will not detect motion.

Text-In Setup Screen

Highlight Text-Inin the Main menu and press the button. The Text-Insetup screen appears.

Figure 39 — Text-In Setup screen.

NOTE: If networking is configured by the external modem, the text-in cannot be set up. Set the DVR for LAN connections and set up text-in for RS-232C port.

NOTE: Text-in data will not be recorded during clip copy.

You can set the DVR to display the text-in information. Highlight the box beside Use Text-Inand press the button to toggle between On and Off.

Highlight the box under the Product Type heading, and press the button. Select your device from the list.

NOTE: Generic Text and EPSON-POS devices are currently supported.

NOTE: The following description is for Generic Text and EPSON-POS devices. The screen changes for different types of text input devices, and there will be different parameter boxes for you to enter information.

27