User’s Manual
NOTE: If the DVR senses S.M.A.R.T. Alert or High Temperature, the S.M.A.R.T. Monitoring Information screen will appear. Once the S.M.A.R.T. Monitoring Information screen displays, replacing the hard disk drive is recommended, usually within 24 hours.
NOTE: The S.M.A.R.T. Monitoring Information screen appears only in the monitoring mode.
The °C field displays the temperature of the storage device.
The Usage field displays the device usage.
The DVR can be set to react to storage problems by activating an internal buzzer or external alarms, display a warning message and/or notifying a PC running 
button to select from Beep, the alarm output terminal that you want to associate with the storage problem event, and/or Notify.
Highlight the S.M.A.R.T. Setup… and press the 
button. The S.M.A.R.T. Setup screen appears.
NOTE: If no hard disk drives are installed in the DVR, the S.M.A.R.T. Setup… button will be disabled.
Figure 31 — S.M.A.R.T. Setup screen.
Your DVR shows the conditions of Hard Disk Drives when the installed IDE hard disk drives support S.M.A.R.T. 
button to toggle between On and Off.
The
Highlight the box beside Period, and select from Daily, Weekly or Monthly for the checking period.
NOTE: When selecting Weekly and Monthly, the Day of Week and Day of Month field will be activated under the Period field. Select the check day or check date.
22