Mitsubishi Electronics DX-TL4U manual Four-Channel Digital Video Recorder

Page 29

Four-Channel Digital Video Recorder

The box beside System Clock displays the DVR's time setting.

The box beside Server Clock displays the time setting of the time server. Highlighting the Update button and pressing the button updates the server clock.

NOTE: The Server Clock will display “ – ” when the DVR cannot load the time information from the time server.

The box beside Next Synchronization displays the time when the next synchronization is scheduled. If you want to synchronize the time instantly, highlight the Now… button and press the button.

CAUTION: When selecting Now…, any video with a later time and date will be lost if the time and date of a time server is earlier than the last recorded image of the DVR.

NOTE: When the time difference between the DVR and the time server is more than one minute, the DVR might not synchronize the time to prevent any unexpected loss of recorded video data. If you want to synchronize the time manually, select Now….

Highlight the Run as Server box and press the button. Pressing the button toggles between On and Off. When it is On, the DVR you are setting up will run as a time server.

You can save your changes by highlighting OK and pressing the button. Selecting Cancel exits the screen without saving the changes.

Highlight the box beside Date Format and press the button. A list of date formats appears. Highlight the format you wish to use and press the button. The choices are:

MM-DD-YYYY

DD-MM-YYYY

YYYY-MM-DD

MM/DD/YYYY

DD/MM/YYYY

YYYY/MM/DD

To change the time format, highlight the box beside Time Format and press the button. The DVR toggles between 12 Hours (AM/PM) and 24 Hours (military time).

You can save your changes by highlighting OK and pressing the button. Selecting Cancel exits the screen without saving the changes.

19

Image 29
Contents Page Page Compliance Notice of FCC Cleaning Important SafeguardsTable of Contents Clip Copy Load Default Setup OSD On-Screen Display Setup Main Monitoring Setup ScreenPTZ Mode Digital Zoom Mode Load / Save Setup Clear All DataList of Illustrations Alarm In Event Action Record setup screen User’s Manual Viii Introduction FeaturesTechnical Overview Package Contents InstallationRequired Installation Tools Connecting the Video SourceSetting Unit for Cvbs or VGA output Connecting the Loop Through VideoConnecting Audio Connecting the Spot Monitor Connecting the MonitorConnecting Alarms Alarm Out Connecting to the Network PortAI 1 to 4 Alarm Factory Reset Connecting to the RS-232C PortConnecting the Power Cord Connecting to the USB PortFront Panel Controls ConfigurationPanic Button Infrared Remote Control Connecting the Infrared Remote ControlSetup Screen Turning on the PowerInitial Unit Setup Four-Channel Digital Video Recorder System Information Normal Setup ScreenSystem Information Change screen System Upgrade screen Date/Time setup screen Holiday Setup screen Four-Channel Digital Video Recorder System Check Config. screen System Check Alarm Out / Notify screen M.A.R.T. Setup screen System Log screen Camera Setup Screen Configuring Input DevicesPTZ Device list Motion Detector setup screen Text-In Setup screen Text-In Generic Text Setup screen Alarm Out setup screen Alarm Out Schedule screen RS232 setup screen Record Mode Setup Screen Configuring Recording SettingsTime-Lapse Record Setup screen Time-Lapse Recording Schedule screen Pre-Event Record Setup screen Alarm In Event Action Record Setup Screen Event Action SetupAlarm In Event Action Alarm Out setup screen Motion Detector Event Action Record setup screen Motion Detector Event Action Alarm Out setup screen Text-In Event Action Record setup screen Text-In Event Action Alarm Out setup screen Video Loss Event Action Record setup screen Video Loss Event Action Alarm Out setup screen OSD On-Screen Display Setup Display SetupFour-Channel Digital Video Recorder Main Monitoring Setup screen Network Setup Screen LAN Manual Setup screen LAN Setup ScreenPort Number Setup screen LAN Dhcp Setup screen Modem Setup screen Dvrns Setup screen Callback Center LAN Setup screen Callback Center Modem Setup screen Password setup screen Password Setup ScreenClip Copy Config ScreenUSB Flash Memory Disk Partition Selection screen Load / Save Setup screen Load / Save SetupUser’s Manual Live Monitoring OperationLive Monitoring Text-In screen PTZ ModePTZ Menu Recording Video Preset Apply screenPlaying Recorded Video Recording AudioArrow Buttons Digital Zoom screen Searching VideoDate/Time Search screen Date/Time SearchEvent Log screen Event Search by Event screen Text-In Log screen User’s Manual Preparing the USB-IDE hard disk drive in Windows Appendix a USB Hard Disk Drive PreparationUser’s Manual Query Example Appendix B Text-In Query ExamplesQuery Example Problem Possible Solution Appendix C TroubleshootingInput Output Appendix D Connector Pin OutsAppendix E Map of Screens Video Appendix F SpecificationsStorage Weee Waste Electrical & Electronic Equipment