Hyundai P224WK manual Digital Signage, How to Connecting Digital RGBHDMI

Page 15

How to Connecting

DIGITAL SIGNAGE

How to Connecting

Digital RGB(HDMI)

1

2

1.Please ensure that the power to the device is switched off, then connect each cable one after another before restoring power.

1 when connect HDMI to HDMI cable

2 when connect DVI to HDMI cable

–must utilize device with DVI signal output from peripheral device

2.Connect the power code to the product.

3.Turn on the power of the product and peripheral device. Screen shows up within 10 seconds.

4.Select "HDMI" input by pressing "SOURCE" on OSD button or remote control.

–HDMI input gives better video quality than analog RGB input.

–Both HDMI and analog RGB support plug and play.

12/36

Image 15

Contents Page U.S.A EN55024 1998+A1 2001 +A2 EN 61000-3-2 2000 +A2 DECLARATION OF CONFORMITYAll of Digital sigange HYUNDAI IT provides EN60065 EN55022 1998+A1 2000 +A2 2003 CLASS AContents DIGITAL SIGNAGEMajor features Safety Information The main plug of the power supply cord shall remain readily operable Do not hang on or jump to the product or mounting rack Image quality of the product Be sure to understandUsers manual Remote control & batteriesCheck the product list Base Frame TypeProper location for product installation Control Panel Title and function of each partTerminal panel 5 8 0 @ $3 4 6 7 9 ! # % Remote control How to insert batteries10/36 How to Connecting Kiosk 11/36Satellite receiver How to Connecting Digital RGBHDMI Vertical frequency ResolutionSupport timing for HDMI Horizontal frequency14/36 How to Connecting analog RGB PC D-SUBSupport timing for PC 16/36 How to Connecting the component OptionSupport timing for component & AV Resolution18/36 How to Connecting the the video OptionHow to Select the Picture Mode Adjusting OSD and explanation of its function20/36 How to Set the Desired Picture21/36 How to Select a Colour Tone22/36 How to Set the Display Size23/36 How to set image adjustment in PC mode Supported only in PC modeMode How to Set NoiseHow to Select the Audio ReductionNRHow to Adjust the Desired Audio Mode How to Select Auto Volume How to Select Sound Mode26/36 How to Reset How to Set Clock,Sleep Time, ON/OFF Time27/36 28/36 Choosing the Your LanguagesHow to set OSD tone How to Set Key-Lock29/36 Example of installation install 3x2 with 6 units How to Set the Multi FunctionSet up Value 32/36 How to Set the Heat ControlDiagnosis the system as it supports Plug and Play 34/36of speaker cable If the batteries are drained, replace them with new batteriesD320MLI/G/D400ML D420MLI/G/P/T D460MLI/G/P/T/H SpecificationsRecommended resolution PowerD405MLI/G/D407MLI/G/P/T REMOTE CONTROL / RS232C COMMAND SPEC 2. REMOTE CONTROL WAVE FORM1. SPEED 9600 Baud/s, 8 bit, No parity, 1 Stop bit To factory reset all set COMMAND TYPECommand example To power off set that is SET ID5. COMMAND TYPE CommandDescription Key value 7. REMOTE CONTROL KEY CODE TABLEHYUNDAI IT Service Center