Hyundai P224WK manual Digital Signage, Do not hang on or jump to the product or mounting rack

Page 7
-Do not hang on or jump to the product or mounting rack.

DIGITAL SIGNAGE

-Do not hang on or jump to the product or mounting rack.

-When the product is left unused for a long time, be sure to unplug the power cord.

-In the case of damage or breakage do not attempt to self repair, please contact local service engineer.

-For D460SL(I), D525SL(I), D705ML(I/G), D705SL(I), D825SL(I), install the product on the flat surface and secure the wheels not to move itself or fall down.

-For D460SL(I), D525SL(I), D705ML(I/G), D705SL(I), D825SL(I), make sure to turn the power off before connecting cables.

-This manual contains general instructions for the display products only so refer to the provided CD-ROM manual and the driver installation manual for the driver installation instructions for touch screen and/or touch screen itself.

-The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

-Shall be connected to a MAINS socket outlet with a protective earthing connection.

-The disconnect device shall remain readily operable.

-The socket-outlet shall be installed near the equipment and shall be easily accessible.

-Use only with a cart, stand, tripod, bracket, or table specified by the

manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

/36

Image 7
Contents Page U.S.A EN55024 1998+A1 2001 +A2 EN 61000-3-2 2000 +A2 DECLARATION OF CONFORMITYAll of Digital sigange HYUNDAI IT provides EN60065 EN55022 1998+A1 2000 +A2 2003 CLASS AContents DIGITAL SIGNAGEMajor features Safety Information The main plug of the power supply cord shall remain readily operable Do not hang on or jump to the product or mounting rack Image quality of the product Be sure to understandUsers manual Remote control & batteriesCheck the product list Base Frame TypeProper location for product installation Control Panel Title and function of each part5 8 0 @ $ Terminal panel3 4 6 7 9 ! # % How to insert batteries Remote control10/36 11/36 How to Connecting KioskSatellite receiver How to Connecting Digital RGBHDMI Vertical frequency ResolutionSupport timing for HDMI Horizontal frequency14/36 How to Connecting analog RGB PC D-SUBSupport timing for PC 16/36 How to Connecting the component OptionSupport timing for component & AV Resolution18/36 How to Connecting the the video OptionHow to Select the Picture Mode Adjusting OSD and explanation of its function20/36 How to Set the Desired Picture21/36 How to Select a Colour Tone22/36 How to Set the Display Size23/36 How to set image adjustment in PC mode Supported only in PC modeMode How to Set NoiseHow to Select the Audio ReductionNRHow to Adjust the Desired Audio Mode How to Select Sound Mode How to Select Auto Volume26/36 How to Set Clock,Sleep Time, ON/OFF Time How to Reset27/36 28/36 Choosing the Your LanguagesHow to Set Key-Lock How to set OSD tone29/36 Example of installation install 3x2 with 6 units How to Set the Multi FunctionSet up Value 32/36 How to Set the Heat ControlDiagnosis the system as it supports Plug and Play 34/36of speaker cable If the batteries are drained, replace them with new batteriesD320MLI/G/D400ML D420MLI/G/P/T D460MLI/G/P/T/H SpecificationsRecommended resolution PowerD405MLI/G/D407MLI/G/P/T 2. REMOTE CONTROL WAVE FORM REMOTE CONTROL / RS232C COMMAND SPEC1. SPEED 9600 Baud/s, 8 bit, No parity, 1 Stop bit To factory reset all set COMMAND TYPECommand example To power off set that is SET IDCommand 5. COMMAND TYPEDescription Key value 7. REMOTE CONTROL KEY CODE TABLEHYUNDAI IT Service Center