Hyundai P224WK manual Digital Signage, How to Set the Heat Control, 32/36

Page 35

How to Set the Heat Control

How to Set the Heat Control

32/36

DIGITAL SIGNAGE

"Heat control" allows you set up fan operation according to interior temperture of the product

Multi			Multi
	Multi Function			Fan Control	:	Off
	Multi Function			Fan Control	:	Off
	Heal Control			Fan Active Temp	:	50 °C
				Hysteresis	:	50 °C
				Temprature	:	50 °C

U Move

 Enter

 Menu

U Move

 Enter

 Menu

1.Press Menu button. Menu items appear on the screen.

2.Press ▲ / ▼ button to move to "Multi" Icon.

3.Press ↲ button to select "Multi" Icon. "Multi Function" is highlighted

4.Press ▲ / ▼ buttons to move to "Heat Control".

5.Press ▶ or ↲ buttons to set up and change the Heat Control.

“Fan Control" - AS the fan operation options, following 3 options are available

-Off : Fan is idle in Off status.

-On : Fan is working in On-status.

-Auto : Fan start working when the working temperature is higher than the measured temperature.

•Fan active Temp -set up value to start the fan.

•Hysteresis- tolerance value of fan operation temperature.

•Temperature- measured current temperature by sensor affixed to PCB'A

Image 35

Contents Page U.S.A EN55024 1998+A1 2001 +A2 EN 61000-3-2 2000 +A2 DECLARATION OF CONFORMITYAll of Digital sigange HYUNDAI IT provides EN60065 EN55022 1998+A1 2000 +A2 2003 CLASS AContents DIGITAL SIGNAGEMajor features Safety Information The main plug of the power supply cord shall remain readily operable Do not hang on or jump to the product or mounting rack Image quality of the product Be sure to understandUsers manual Remote control & batteriesCheck the product list Base Frame TypeProper location for product installation Control Panel Title and function of each part3 4 6 7 9 ! # % Terminal panel5 8 0 @ $ 10/36 Remote controlHow to insert batteries Satellite receiver How to Connecting Kiosk11/36 How to Connecting Digital RGBHDMI Vertical frequency ResolutionSupport timing for HDMI Horizontal frequency14/36 How to Connecting analog RGB PC D-SUBSupport timing for PC 16/36 How to Connecting the component OptionSupport timing for component & AV Resolution18/36 How to Connecting the the video OptionHow to Select the Picture Mode Adjusting OSD and explanation of its function20/36 How to Set the Desired Picture21/36 How to Select a Colour Tone22/36 How to Set the Display Size23/36 How to set image adjustment in PC mode Supported only in PC modeMode How to Set NoiseHow to Select the Audio ReductionNRHow to Adjust the Desired Audio Mode 26/36 How to Select Auto VolumeHow to Select Sound Mode 27/36 How to ResetHow to Set Clock,Sleep Time, ON/OFF Time 28/36 Choosing the Your Languages29/36 How to set OSD toneHow to Set Key-Lock Example of installation install 3x2 with 6 units How to Set the Multi FunctionSet up Value 32/36 How to Set the Heat ControlDiagnosis the system as it supports Plug and Play 34/36of speaker cable If the batteries are drained, replace them with new batteriesD320MLI/G/D400ML D420MLI/G/P/T D460MLI/G/P/T/H SpecificationsRecommended resolution PowerD405MLI/G/D407MLI/G/P/T 1. SPEED 9600 Baud/s, 8 bit, No parity, 1 Stop bit REMOTE CONTROL / RS232C COMMAND SPEC2. REMOTE CONTROL WAVE FORM To factory reset all set COMMAND TYPECommand example To power off set that is SET IDDescription 5. COMMAND TYPECommand Key value 7. REMOTE CONTROL KEY CODE TABLEHYUNDAI IT Service Center