Hyundai P224WK manual Digital Signage, How to Connecting analog RGB PC D-SUB, 14/36

Page 17

DIGITAL SIGNAGE

How to Connecting analog

RGB (PC D-SUB)

1.Please ensure that the power to the device is switched off, then connect each cable one after another before restoring power.

2.Connect D-SUB to D-Sub cable. Then tighten the screw of the cable after connecting PC D-SUB.

3.Connect the power cord to the product.

4.Turn on the power of the product and PC . The screen will appear within 10 seconds.

5.Select "PC" input by pressing "SOURCE" on OSD button or remote control.

–HDMI input gives better video quality than analog RGB input.

–Both HDMI and analog RGB support plug and play.

14/36

Image 17

Contents Page U.S.A All of Digital sigange HYUNDAI IT provides DECLARATION OF CONFORMITYEN60065 EN55022 1998+A1 2000 +A2 2003 CLASS A EN55024 1998+A1 2001 +A2 EN 61000-3-2 2000 +A2Contents DIGITAL SIGNAGEMajor features Safety Information The main plug of the power supply cord shall remain readily operable Do not hang on or jump to the product or mounting rack Image quality of the product Be sure to understandCheck the product list Remote control & batteriesBase Frame Type Users manualProper location for product installation Control Panel Title and function of each part3 4 6 7 9 ! # % Terminal panel5 8 0 @ $ 10/36 Remote controlHow to insert batteries Satellite receiver How to Connecting Kiosk11/36 How to Connecting Digital RGBHDMI Support timing for HDMI ResolutionHorizontal frequency Vertical frequency14/36 How to Connecting analog RGB PC D-SUBSupport timing for PC 16/36 How to Connecting the component OptionSupport timing for component & AV Resolution18/36 How to Connecting the the video OptionHow to Select the Picture Mode Adjusting OSD and explanation of its function20/36 How to Set the Desired Picture21/36 How to Select a Colour Tone22/36 How to Set the Display Size23/36 How to set image adjustment in PC mode Supported only in PC modeHow to Select the Audio How to Set NoiseReductionNR ModeHow to Adjust the Desired Audio Mode 26/36 How to Select Auto VolumeHow to Select Sound Mode 27/36 How to ResetHow to Set Clock,Sleep Time, ON/OFF Time 28/36 Choosing the Your Languages29/36 How to set OSD toneHow to Set Key-Lock Example of installation install 3x2 with 6 units How to Set the Multi FunctionSet up Value 32/36 How to Set the Heat ControlDiagnosis of speaker cable 34/36If the batteries are drained, replace them with new batteries the system as it supports Plug and PlayRecommended resolution SpecificationsPower D320MLI/G/D400ML D420MLI/G/P/T D460MLI/G/P/T/HD405MLI/G/D407MLI/G/P/T 1. SPEED 9600 Baud/s, 8 bit, No parity, 1 Stop bit REMOTE CONTROL / RS232C COMMAND SPEC2. REMOTE CONTROL WAVE FORM Command example COMMAND TYPETo power off set that is SET ID To factory reset all setDescription 5. COMMAND TYPECommand Key value 7. REMOTE CONTROL KEY CODE TABLEHYUNDAI IT Service Center