JVC XV-DDV1SL Installing satellite controller, Situate the satellite controller, Make connections

Page 17

17

Setting the satellite controller

Satellite receiver

The following procedure is required if you receive satellite programmes through a satellite receiver. Approximately 20 seconds before a timer recording starts, the unit sets its input mode to “L-2” (or “SAT”) and automatically changes the programme position numbers on the satellite receiver by sending a signal to your satellite receiver.

Remote sensor

Transmitter

Satellite controller

(Supplied)

Suggested location of the satellite controller

Installing satellite controller

1Situate the satellite controller.

Place the satellite controller so that the path between its transmitter and the remote sensor on the satellite receiver is unobstructed.

2Attach the satellite controller.

Fix securely using the adhesive strip attached on the back of the satellite controller.

Satellite receiver

3Make connections.

Be sure to connect the L-2 IN connector on the rear to the 21-pin SCART connector on the satellite receiver.

NOTE

When connecting your satellite receiver, refer to its instruction manual.

4Connect the satellite controller to the unit.

21-pin SCART cable

(not supplied)Connect the satellite controller to the SAT CONTROL connector on the rear.

		DVD/HDD		DVD		L-1
DVD DIGITAL OUT		VIDEO	AUDIO	VIDEO SIGNAL
DVD DIGITAL OUT		OUT	OUT	SELECTOR
PCM / STREAM		VIDEO	LEFT
PCM / STREAM
COAXIAL	OPTICAL			COMP.	Y/ C	L-2
				/ RGB
		S-VIDEO	RIGHT

IN/OUT

IN

SAT CONTROL

IN

OUT

AV ANTENNA

COMPU LINK

XV-DDV1SL

Image 17

Contents XV-DDV1SL Important for Laser Products Before using the unit Precautions for the HDDWhile using the unit Moisture condensationPrecautions on the built-in DVD player Contents Front view How to open and close the front panelDisplay window Rear viewRemote control Controlling the TV using remote control Installing batteriesPrecautions for the safe use of batteries To set the TV’s brand codeTVs Codes Usable buttons for operating the TVBasic connections Connecting a TV with the Scart connectorPlug in the unit Disconnect the TV aerial cable from the TVConnecting a TV with the audio/video jacks Precautions on connecting the power cordPresetting the built-in TV tuner Easy & simple setupAutomatically-Auto Setup Turn on the powerPress 5 or to move to T-V LINK, then press Enter or Start TV-linked SetupUnit sets the clock time and Guide Program You can use your TV’s remote control to turn off the unit TV Auto Power OnWhat you can do with T-V Link Auto StandbyBefore performing any operations Selecting the playback sourceAbout the opening screen Situate the satellite controller Installing satellite controllerAttach the satellite controller Make connectionsTurn on the satellite receiver Show the Main Setup screen on the unitSelect the Initial Set screen Select the Sat Control Set screenBrand name Code Check what happened on the satellite receiverShow the DVD Player SET UP screen DVD Initial SetupTo bring up the DVD Player SET UP screen later Select the DVD playerSelect the HDD deck What is Live MemoryChoose a programme Press HDD/TV PR +/- repeatedly or the number buttonsTo go back to a previous scene quickly and play it back Receiving stereo and bilingual programmesTo change the sound you hear To record Nicam bilingual programmesBasic recording On the remote control onlySet the recording speed Start recordingChanging the recording speed Instant Timer Recording ITRTo stop recording Watching another programme while recordingStart playback Basic playbackTo stop playback temporarily Playback Pause To stop playbackSkipping forward quickly-Quick Skip While playing, press on the remote controlSearching for a particular scene-Variable Speed Search Playing in slow motion-Slow Motion This feature is also available during recordingRepeating the same programme-Repeat Play While playing or recording, press ¢ cursor 3 or Or cursorWhen playing Live Memory during playback When watching or recording a TV programme through this unitWhen playing Live Memory during recording When playing back a recorded programme seePreparation you need to make your own play lists see Icons used on the Navigation screens and their meaningsTo search the programmes by entering their titles Title To move to the ﬁrst or last recorded thumbnail, pressPlaying back a programme or a play list Selecting programmes on Navigation screenShow the Navigation screen Select a programme to playSelect the programmes to play in your Desired order Playing back two or more programmes in your desired orderMemory Press Enter Programmes are played in the selected order4Select a programme to play Enter the Category screen3Select a category Press 3 / 2 / / 5 to move to TITLE, then press Enter the Title screenSelect the initial letter of the title Show the Edit screen Modifying recorded programmesTo use your favourite scene for the thumbnail REC ListEnter the REC LIST/MODIFY screen Finish the procedureSelect a programme Change the thurmbnailEnter a new title Enter the title entry screenSave the title Enter the REC LIST/DELETE screenTo divide a programme Show the Edit screen Making play listsEnter the REC LIST/DIVIDE screen Divide a programmeSelect the start and end points of the scene you want To create a play list Show the Edit screenSelect other scenes you want Enter the Play LIST/CREATE screenSelect the item you want to modify To modify a play list Show the main modiﬁcation screenMake modiﬁcations To delete a play list Show the Play LIST/DELETE screenShow the Program screen Select the Video PLUS+ Timer programmingEnter the Pluscode number Conﬁrm the Pluscode numberSet the Weekly/Daily Timer Check the contents of the new timer programmingSet the PDC mode Finish the timer programmingSet the date Select the Express Timer programmingSet the start time and stop time Programme Select the programme position numberSelect and set other options as required Monday’s programme Weekly/Daily TimerConﬁrm, erase, or change the timer programming Modifying timer programmingsTo conﬁrm or change the contents of the programming Show the Programme List screenActivate Automatic Satellite Recording TimerBefore performing the following steps To deactivate Automatic Satellite Recording, press SATInsert a disc in the disc slot Playing back discsIf a menu is shown on the TV screen About invalid operation iconTo check the playback status About PBC Playback ControlAbout Screen Saver To turn off the status barVarious speed playback Resuming playbackAdvancing or reversing playback rapidly while monitoring To clear the memoryPlaying back in slow motion-Slow Motion Locating the beginning of a scene or songLocating a desired scene item from the disc menu Playing from a speciﬁc pointFor DVD video For SVCD/VCD with PBCTo clear the menu bar Specifying a desired titleTo exit from the program mode To stop Program Play and to check the program contentsChanging the playback order Playing in a speciﬁc order-Program PlayTo cancel Repeat Play To stop and cancel Random PlayTo repeat the current track/ﬁle or all tracks/ﬁles To stop repeat playbackPress Enter at the end of the repeat part point B To repeat a desired part A-B repeat playbackDuring playback, press Subtitle To selecting a multi-angle view of DVD VideoDuring playback, press Audio Press or 5 or Subtitle to select the subtitleTo clear the 3D Phonic window To cancel the effectSimulating surround sound 3D To clear the VFP mode window Adjusting the pictureZooming To release the zoomShow the status bar Menu bar operationsShow the menu bar Select the icon you want to useMenu bar functions for SVCD/VCD/CD Menu bar functions for DVD VideoTime information CHAP. Chapter searchPlaying an MP3 disc Operations using the MP3 Control screenBasic operations About MP3 discsTo start playing back a ﬁle, press 3 Select or Enter MP3/JPEG OperationsTo repeat an MP3 ﬁles Playing a Jpeg discPress on Screen once About Jpeg discsUse the following buttons to operate a Jpeg disc Operations using the Jpeg Control screenSelect PausedTo zoom in the picture To repeat the slide showTo start Repeat Play, press 3 Select Press 8 during slide show Press ZoomShow the Main Setup screen Basic procedureSelect an option for the setting Finish the settingOFF, 30 MIN, 1 HR, and 3 HR Setting optionsRecorded. See MONO, the sound will be mutedConnector Signals is used for connectionReceiver connected to the L-2 in connector This unitJust Clock Setting the clock timePress or 5 to set the current time, then press Desired station as Shown in the TV listingsPress SET UP three times to ﬁnish the setting Setting the built-in TV tunerPress the number button 0 to select TV Prog or SAT Press or 5to move to Auto CH SET, thenTo delete a station To set the built-in TV tuner manually-Manual Channel SetupTo ﬁne-tune the station channel To assign the station namesPress Enter again Press or 5 to select a new station nameEach time you press or TV station and ID listTo assign your own station names 3SAT TV station channel number guideShow the DVD Setup menu screen Changing the DVD settingsSelect one of the DVD Setup menu screens Select an item you want to changeCode from AA to ZU Select an option for the setting Finish the settingFrom AA to ZU PS Pan Scan conversion Select when you connect LB Letter Box conversion Select when youNormal Wide television screen Select when FilmLOW PCM onlyNormal Setting options See You can select the resume playback modeSetting options DVD SettingSetting Parental Lock To temporarily release Parental Lock To change the settingsPress or 5 to select the desired option then press Press or 5 to move to Temporary RELEASE, then press EnterOn the remote control Change the remote code for the unit On the remote control Change the remote control codeSet the remote control code for the remote ControlConnection using the Video connector Select the input modeConnection using the S-VIDEO connector Precaution before editing onto the HDDStart recording on the recording component To use the HDD deck for the playback componentConnection only with the Scart cables Press 3 Select You can also use HDD Navigation seeConnection to the L-2 in connector with the Scart cables Select the input mode on the HDD deckWhen connecting the VCR to the L-1 IN/OUT connector Start playback on the VCR Start recording on the HDD deckSimple Connections Connecting to a satellite receiverFor DVD playback only Connecting to a Stereo SystemFor DVD/HDD playback General TroubleshootingHDD operations DVD operationsPicture On-screen messagesAudio MP3 discTimer programming is completed properly Appears when you have tried to delete a programmeTo set the timer programming, set the built-in clock You can store 16 timer programmings. To store a newCountry/Area code list for Parental Lock Table of languages and their abbreviations Digital output signal chartGlossary Speciﬁcations Index Numerics & Symbols0603KTYMDWJ EM