32 EN, To use this player as a recorder | JVC LYT1300-001A specification

JVC LYT1300-001A manual 32 EN, To use this player as a recorder, To use this player as a player

32 EN

DUBBING

Dubbing To Or From A VCR

COMPONENT	Y	Pb	Pr
VIDEO	Y	Pb	Pr
OUT
	S	VIDEO L	AUDIO	R

	To S	To AV
	S-video cable	Audio/video cable
	(provided)	Audio/video cable
	(provided)	(provided)
		(provided)

8Press 4/9 on the player to start playback of the source tape.

9At the point you want to start dubbing, engage the VCR’s Record mode.

10To pause dubbing, engage the VCR’s Record- Pause mode and press 4/9 on the player.

11Repeat steps 8 – 10 for additional editing. Stop the VCR and player.

NOTES:

● It is recommended to use the AC Power Adapter/

Charger as the power supply instead of the

battery pack. ( pg. 10)

● As the player starts to play your footage, it will

appear on your TV. This will confirm the

connections and the AUX channel for dubbing

purposes.

● Before you start dubbing, make sure that the

indications do not appear on the connected TV. If

they do, they are being recorded onto the new

tape.

To choose whether or not the following displays

appear on the connected TV...

• Date/time

Set “DATE/TIME” to “AUTO”, “ON” or “OFF”.

( pg. 26, 29) Or, press DISPLAY on the remote

control to turn on/off the date indication.

• Time code

1	2	3	4

VCR

ATo S-VIDEO* IN or OUT

BYellow to VIDEO IN or OUT

CWhite to AUDIO L IN or OUT

DRed to AUDIO R IN or OUT

Set “TIME CODE” to “OFF” or “ON”.

( pg. 26, 29)

• Indications other than date/time and time code

Set “ON SCREEN” to “OFF”, “LCD” or “LCD/

TV”. ( pg. 26, 29)

● Playback images recorded in HD or SD mode with

this player will be converted to DV format (480i)

image.

To use this player as a recorder

*Connect when your TV/VCR has an S-VIDEO IN/OUT connector. In this case, it is not necessary to connect the yellow video cable.

To use this player as a player

1Following the illustrations, connect the player and the VCR. Also refer to page 18.

2Set the player’s Playback Mode Switch to “VIDEO”.

3Set the Power Switch to “ON” while pressing down the Lock Button located on the switch.

4Turn on the VCR’s power.

5Insert the source cassette in the player.

6Insert the recording cassette in the VCR.

7Engage the VCR’s AUX and Record-Pause modes. ● Refer to the instruction manual for the VCR.

1)Perform steps 1 to 3 in the left column.

2)Set “S/AV INPUT” to “ON”. ( pg. 26, 27)

3)Set “REC MODE” to “SP” or “LP”. ( pg. 26, 27)

4)Insert the recording cassette in this player.

5)Press and hold REC (7), then press 4/9 to engage the Record-Pause mode. The “ A/V in ” indication appears on the screen.

6)Press 4/9 to start recording. The indication rotates.

7)Press 8 to stop recording. The indication stops rotating.