JVC LYT1300-001A manual Copying Failed, Memory Card, Please Format, No Images Stored, Card Error

EN 49

Warning Indications

Indications	Meaning
	● Appears if dubbing of copyguarded signals is attempted while this player is
	being used as a recorder.
	● Appears in the following cases when dubbing still images from a tape to a
COPYING FAILED	memory card:
	– when no memory card is loaded.
	– when the memory card’s memory is full.
	– when the memory card is not formatted.
	– when a write-protected SD Memory Card is loaded.	( pg. 36)
MEMORY CARD!	Appears if there is no memory card loaded when you attempt to access data on a
	memory card.
PLEASE FORMAT	Appears when there is a problem with a memory card and its memory is corrupt,
	or it has not been initialised. Initialise the memory card.	( pg. 25)
NO IMAGES STORED	Appears if there are no image files stored in the memory card when you attempt
	memory card playback.
CARD ERROR!	Appears when the player does not recognise the loaded memory card. Remove
	the memory card once and insert it again. Repeat these procedures until no
	indication appears. If the indication still appears, the memory card is corrupted.
UNSUPPORTED FILE!	Appears when playing back a file that is not compatible with DCF or a file with a
	size that is not compatible with this player.
CHECK CARD’S WRITE	● Appears when you attempt to dub digital still images when the write protection
	tab on the SD Memory Card is set to the “LOCK” position.
PROTECTION SWITCH	● Appears when you attempt MEMORY SELECT menu operation with a write-
	protected SD Memory Card loaded.
E01, E02 or E06	The error indications (E01, E02 or E06) show what type of malfunction has
	occurred. When an error indication appears, the player turns off automatically.
UNIT IN SAFEGUARD
	Remove the power supply (battery, etc.) and wait a few minutes for the indication
MODE REMOVE AND
	to clear. When it does, you can resume using the player. If the indication remains,
REATTACH BATTERY
	consult your nearest JVC dealer.
E03 or E04	The error indications (E03 or E04) show what type of malfunction has occurred.
	When an error indication appears, the player turns off automatically. Eject the
UNIT IN SAFEGUARD
	cassette once and re-insert it, then check if the indication clears. When it does,
MODE EJECT AND
	you can resume using the player. If the indication remains, consult your nearest
REINSERT TAPE			REFERENCES
	JVC dealer.