JVC LYT1300-001A manual 52 EN, About moisture condensation, Serious malfunctioning

Page 52

52 EN

CAUTIONS (cont.)

5. Dirty heads can cause the following problems:

No picture during playback.

Blocks of noise appear during playback.

During playback, the Head Clog Warning indicator “” appears.

In such cases, use an optional cleaning cassette. Insert it and play back. If the cassette is used more than once consecutively, damage to the video heads may result. After the player plays back for about 20 seconds, it stops automatically. Also refer to the cleaning cassette’s instructions.

If, after using the cleaning cassette, the problems still exist, consult your nearest JVC dealer.

Mechanical moving parts used to move the video heads and video tape tend to become dirty and worn out over time. In order to maintain a clear picture at all times, periodic check-ups are recommended after using the unit for about 1,000 hours. For periodic check-ups please consult your nearest JVC dealer.

About moisture condensation...

You have observed that pouring a cold liquid into a glass will cause drops of water to form on the glass’ outer surface. This same phenomenon occurs on the head drum of a player when it is moved from a cool place to a warm place, after heating a cold room, under extremely humid conditions or in a place directly subjected to the cool air from an air conditioner.

Moisture on the head drum can cause severe damage to the video tape, and can lead to internal damage to the player itself.

Serious malfunctioning

If malfunctioning occurs, stop using the unit immediately and consult your local JVC dealer.

The player is a microcomputer-controlled device. External noise and interference (from a TV, a radio, etc.) might prevent it from functioning properly. In such cases, first disconnect its power supply unit (battery pack, AC Power Adapter/ Charger, etc.) and wait a few minutes and then re- connect it and proceed as usual from the beginning.

Image 52
Contents CU-VH1 Dear Customer Important for owners in the U.KIt is recommended that you… Some DO’S and DON’TS on the Safe USE of Equipment Above ALLOn the AC adapter AA-V40EG, AA-V40EK Before using the player…On the main unit CU-VH1 Remote Control Unit Lithium battery is preRemote Control Large x Connector Cover Medium x Small xHow To Attach The Core Filter Procedure below is an example of winding cable onceTypes of core filters Size Cable Times to Release the stoppers on both ends of the core filterHow To Attach The Connector Cover How To Attach The StrapHow To Use The Audio Cable References Power Charging The Battery PackUsing The Battery Pack On NextUsing AC Power 10 ENAbout Batteries Short circuit and possibly start a fireOperation Mode 12 EN LCD MonitorDate/Time Settings Player needs to be powered up to load or eject a cassette Approximate recording time Tape Recording mode14 EN Loading a Cassette Unloading a CassetteTo protect valuable files available only for SD Memory Card… Information On SD Memory Card16 EN Normal PlaybackStill Playback Frame-By-Frame PlaybackTo cancel Blank Search midway, press Shuttle SearchTo component video connectors 18 ENTo Connect a Conventional TV or VCR To S-VIDEO Yellow to Video White to Audio L Red to Audio RIf using a VCR, go to step If not, go to stepFor S-video or video connection For component video connectionAvailable only with the remote control provided.  pg 20 ENAuto Playback Of Images Playback ZoomIndex Playback Of Files Viewing File InformationProtecting Files 22 ENTo Remove Protection Deleting Files To delete the currently displayed fileMemory card Card24 EN Resetting The File NameFolder and File names Initialising a Memory Card To Reset The Number Of PrintsTo Print By Selecting Still Images And Number Of Prints 26 EN Example t Video MenuFor Video Playback Menus For D.S.C. Playback MenusPlayback sound Recording modeVideo/AV input 28 EN System MenuDisplay setting Date and time display settingTime code setting Clock adjustmentNavigation Function 30 ENTo add thumbnail images during video playback Press R or T to select t VIDEO, and press MENU. The Video Menu appearsPress To select NAVI.DEL., and pressTo use this player as a recorder 32 ENTo use this player as a player To i.LINK Connector Link cable optional To i.LINK IN/OUT When a blank portion is recorded on a tape DV to DV dubbingMPEG2 to MPEG2 dubbing Proper recordingRecording modes and features FeaturesSD 480p HD 720p36 EN Dubbing Still Images Recorded On a Tape To a Memory CardStill images can be dubbed from a tape to a memory card Approximate Number of Storable ImagesButtons And Functions Installing The BatteryBeam Effective Area indoor use Frame-By-Frame Playback DV mode only Slow-Motion Playback DV mode only38 EN Playback Zoom DV mode only To hear the dubbed sound during playback… 40 ENSet DV NARR. to on or MIX.  pg Using i.LINK cable Using USB cableConnection To a Personal Computer 42 EN ItemsPower Symptom Possible Causes Corrective ActionHD or SD mode when a Disconnect either of two Video and D.S.C. PlaybackAdvanced features 44 ENOther problems When the LCD monitor’sPlayer Any defect of the unit Effective dots more than 99.99 %46 EN LCD monitor’s Adjust the brightnessLCD monitor.  pg USE Cleaning This ModeCheck TAPE’S Erase Protection TAB48 EN Card Error Protection SwitchUnit in Safeguard Mode Remove50 EN Battery PacksCassettes Memory Cards LCD MonitorMain Unit Do NOT…About moisture condensation 52 ENSerious malfunctioning Slide BATT.RELEASE 1 and remove the battery pack 2 Cleaning The PlayerAfter Use 54 EN USB AudioVTR Index Controls, Connectors And Indicators 56 ENControls Indicators ConnectorsOther Parts OPEN/EJECTTo Cancel 58 ENLCD Monitor Indications During D.S.C. Playback Blank SearchLink output setting i.LINK OUT Playback sound Sound ModeConnections Date/TimeCU-VH1