EN 15
Loading A Memory Card /Unloading A Memory Card
Card Cover
(MEMORY CARD)
Memory card
Clipped edge
Label
1Make sure the player’s power is off.
2Slide to open the card cover (MEMORY CARD).
3To load a memory card, firmly insert it with its clipped edge first.
To unload a memory card, push it once. After the memory card comes out of the player, pull it out.
●Do not touch the terminal on the reverse side of the label.
4Close the card cover.
To protect valuable files (available only for SD Memory Card)…
Write/erase protection tab 
Slide the write/erase protection tab on the side of the memory card in the direction of “LOCK”. This prevents the memory card from being recorded over. To record on this memory card, slide the tab back to the position opposite to “LOCK” before loading it.
NOTES:
●Be sure to use only SD Memory Cards marked
“
” or MultiMediaCards marked
“
”.
●Some brands of memory cards are not compatible with this player. Before purchasing a memory card, consult its manufacturer or dealer.
●Before using a new memory card, it is necessary to FORMAT the card. ( pg. 25)
ATTENTION:
Do not insert or remove the memory card while the player is turned on, as this may cause the memory card to be corrupted or cause the player to become unable to recognise whether or not the card is installed.
Information On SD Memory Card
SD Memory Cards up to 64 MB have been verified for use with this player. (As of October 2003)
GETTING STARTED