EN 25
To Print By Selecting Still Images And Number Of Prints
1Perform steps 1 – 6 in “To Print All Still Images (One Print For Each)” ( pg. 24).
2Press R or T to select
Initialising A Memory Card
You can initialise a memory card any time. After initialising, all files and data stored in the memory card, including those which have been protected, are cleared.
“CURRENT”, and press MENU. The DPOF screen
DPOF
1 Open the LCD monitor fully. |
● Set the Video Output Mode Switch to “LCD |
appears.SHEETS
3 Press 3 or 5 to | 0 0 |
RETURN | |
select the desired file. |
|
4 Press R or T to select the number indication |
(00), and press MENU. |
2 | MONITOR”. ( pg. 11) |
Set the Playback Mode Switch to “MEMORY”. | |
3 | Set the Power Switch to “ON” while pressing |
| down the Lock Button located on the switch. |
5 Select the number of prints |
by pressing R to increase number, or “T” to decrease the number, and press MENU.
● Repeat steps 3 through 5 |
for the desired number |
of prints. |
● The number of prints can be set up to 15. |
● To correct the number of prints, select the |
4Press MENU. The Menu Screen appears.
5Press R or T to select “FORMAT”, and press MENU. The FORMAT screen appears.
MENU
PROTECT
DELETE DPOF
NO . RESET FORMAT D I SPLAY
END
PLAYBACK
image again and change the number. |
6Press R or T to select
6 Press R or T to select “EXECUTE”, and press
“RETURN”, and press MENU. The “SAVE?”
DPOF
MENU. The memory card is initialised.
● When initialisation is finished, “NO IMAGES |
appears. | SAVE? | |
● If you did not change |
| |
EXECUTE | ||
CANCEL | ||
any settings in step 3 | ||
| ||
through 5, the Menu |
| |
Screen reappears. |
|
7Press R or T to select “EXECUTE” to save the setting you have just made, and press MENU. ● To cancel selection, select “CANCEL”.
To Reset The Number Of Prints
1Perform steps 1 – 6 in “To Print All Still Images (One Print For Each)” ( pg. 24).
2Press R or T to select “RESET”, and press MENU. The DPOF screen appears.
3Press R or T to select “EXECUTE”, and press MENU. The normal playback screen appears.
●To cancel selection, select “RETURN”.
●The number of prints is reset to 0 for all still images.
CAUTION:
While performing the above, never disconnect power, as this may cause the memory card to be corrupted.
STORED” appears. |
● To cancel initialisation, select “RETURN”. |
CAUTION:
Do not perform any other operation (such as turning off the player) during initialisation. Also, be sure to use the provided AC Power Adapter/ Charger, as the memory card may be corrupted if the battery becomes exhausted during initialisation.
DIGITAL STILL CAMERA (D.S.C.)