JVC LYT1300-001A manual Recording mode, Playback sound, Video/AV input

PLAYBACK MENUS											EN 27
		Video Menu						Recording mode
								Allows you to set the video recording mode (SP or
			VIDEO					LP) depending on your preference. It is
								recommended you use “REC MODE” in VIDEO
								Menu when using this player as a recorder during
Playback sound								dubbing. ( pg. 32, 34)
								REC MODE			(Factory-preset: SP)
During tape playback, the player detects the sound									SP / LP
mode in which the recording was made, and plays
the sound back. Select the type of sound to								Dubbing from tape to memory card
accompany your playback picture. According to the
menu access explanation on page 26, select										COPY	(Factory-preset: ON)
“SOUND MODE” or “DV NARR.” from the Menu									OFF: When the SNAP SHOT button is pressed
Screen and set it to the desired parameter.
									during tape playback, the playback image pauses
SOUND MODE						(Factory-preset: STEREO	)
									and normal playback will resume after
		STEREO		: Sound is output from both “L” and					approximately 6 seconds. (The still image is not
		“R” channels in stereo.							recorded.)
		SOUND L			: Sound from the “L” channel is				ON: Enables dubbing of images recorded on a
	output.								tape to a memory card. ( pg. 36)
	SOUND R				: Sound from the “R” channel is			Deleting thumbnail images
	output.
DV NARR.						(Factory-preset: OFF)		For details, refer to “To delete thumbnail images”
	OFF: Original sound is output from both “L” and							( pg. 31).
	“R” channels in stereo.							NAVI.DEL.
	ON: Dubbed sound is output from both “L” and								IMAGE SEL. / TAPE SEL. / ALL / RETURN
	“R” channels in stereo.

FEATURES

MIX: Original and dubbed sounds are combined and output in stereo on both “L” and “R” channels.

NOTES:

●You can also use AUDIO button on the provided remote control ( pg. 37) to change the output sound (without having to access the Playback Menu).

●The “SOUND MODE” setting is available for both 12-bit and 16-bit sound. (In previous models’ functions, “12-bit” is called “32 kHz” and “16-bit” is called “48 kHz”.)

●The player cannot detect the sound mode in which the recording was made during fast-forward or rewind. During playback the sound mode is displayed in the upper left corner.

S-Video/AV input

S/AV INPUT (Factory-preset: OFF)

OFF: Enables audio and video signal output to a TV, VCR, etc. via the AUDIO (L/R) and VIDEO or AUDIO (L/R) and S connectors. ( pg. 18, 32)

ON: Enables audio and video signal input from the AUDIO (L/R) and VIDEO connectors, or audio and S-video signal input from the AUDIO (L/R) and S connectors. ( pg. 32)

NOTE:

When VIDEO and S connectors are simultaneously connected, S-video signal is input from the S connector.

ADVANCED