Compex Technologies WPE54 manual Further Configuration, How to set up WPA-PSK

Chapter 5 Further Configuration

4.5.2How to set up WPA-PSK

[Available in AP/Gateway mode ONLY]

The guidelines below will help you to set up the access point for using WPA- PSK. Please take note that the WPA-PSK, WPA2-PSKand WPA-PSK- AUTO security modes share the same functions).

Security Mode –WPA-PSK, WPA2-PSK, WPA-PSK-AUTO

At the WLAN Security Setup page:

Select WPA-PSKmode.

Click on Apply button.

Specify the key entry format by selecting either:

•Passphrase (Alphanumeric characters)

•Hexadecimal

Fill in the pre-shared network key.

If you are using the Passphrase format, your entry can consist of a minimum of 8 alphanumeric characters or a maximum of 63 alphanumeric characters.

Otherwise, when using the Hexadecimal format, your entry MUST consist of 64 hexadecimal characters.

The Cipher Type is set to TKIP.

Define the GTK update (Group Transient Key update), or the length of time after which the access point will automatically generate a new master key.

66