Compex Technologies WPE54 manual Security Mode -802.1x/RADIUS, Radius Server, if any

Chapter 5 Further Configuration

4.5.3How to set up 802.1x/RADIUS [Available in Access Point mode ONLY]

The guidelines below will help you to set up the access point for using 802.1x/RADIUS.

Security Mode –802.1x/RADIUS

At the WLAN Security Setup page:

Select 802.1x mode.

Click on Apply button.

Key in the IP address of the Primary RADIUS Server in your WLAN.

You can optionally add in the

IP address of a Secondary

RADIUS Server, if any.

[Refer to the section on How to set up WEP.]

Press the Save button.

Click on Reboot to restart the system, after which your settings will become effective.

The RADIUS authentication server MUST be in the same subnet as the access point.

68