Compex Technologies WPE54 manual Wireless Pseudo Vlan Per Group

Chapter 4 Common Configuration

4.4.1.2 Wireless Pseudo VLAN Per Group

The access point can configure up to four ‘groups’ of wireless clients identified by their MAC address. Whenever a wireless client requests network access, the access point will first verify whether its MAC address is present in any of the Pseudo VLAN groups. If it is, the access point will grant it access to all the wired system resources and to all other wireless clients belonging to the same Pseudo VLAN group only.

The following steps demonstrate how to set up Wireless Pseudo VLAN Groups.

Wireless Pseudo VLAN – Per Group

From WLAN Setup under Configuration, click on Advanced, which shows the WLAN Advanced Setup page.

Click on the Access Control button.

The Wireless Pseudo VLAN function is Disabled by default.

Select Pseudo VLAN from the drop-down list.

Click on the Apply button.

46