Chapter 4 Common Configuration
4.3Scan for Site Survey
(For Wireless Client Mode Only)
This feature only available in wireless client mode (Access Point Client, Wireless Routing Client and Wireless Ethernet Adapter).
When one of the access points is connected to wired network and a set of wireless stations, it is referred to as a Basic Service Set (BSS). The MAC address of the access point is used as entry here.
SSID refers to the network name that uniquely identifies the network to which the access point is connected.
Chan refers to the channel being used for transmission.
Auth refers to the types of authentication, such as WPA,
Alg refers to the types of algorithm, such as WEP, TKIP, etc being used by the access point.
Signal describes the strength of the signal received in percentage.
Scan For Site Survey
In the Mode Setup page, click on the Scan button.
41
