Chapter 4 Common Configuration
4.4.1.3 Tag VLAN
- [Available in Access Point mode ONLY]
While a
Here, each VLAN is identified by a ‘tag’, which the switch associates with specific ports. The switch will then pass this tag information with every data packet transmitted. By using the same tag on each access point in the network, full client roaming can be implemented while complying with VLAN integrity.
Wireless Pseudo VLAN – Tag VLAN
From WLAN Setup under Configuration, click on Advanced, which shows the WLAN Advanced Setup page.:
Go to the Extended Features section.
Click on the Access Control button.
The Wireless Pseudo VLAN function is Disabled by default.
Select Tag VLAN from the
Click on the Apply button.
The Tag VLAN page enables you to manage specific VLAN groups by adding or deleting clients through their MAC address.
Click on the Add button.
49
