Chapter 4 Common Configuration
4.3.1Show Link Information
(For Wireless Client Mode Only)
This function offers a summary of the link data when the access point is in the wireless client mode, i.e., either of the Access Point Client, Wireless Routing Client or the Wireless Ethernet Adapter mode.
Show Link Information
In the Mode Setup page, go to the
Link Information section.
Click on the Show Link Information button. When an access point is connected to a wired network and a set of wireless stations, it is referred to as a Basic Service Set (BSS).
The Link Information table illustrates the following data:
State refers to the MAC address of the BSS.
Current Channel is the channel being presently used for transmission.
Signal Strength, given in percentage form, shows the intensity of the signal received and hence the connection strength
43
