Compex Technologies WPE54 manual Configuring WAN Setup, Changing WAN Type

Chapter 5 Further Configuration

5.2Configuring WAN Setup

(only available in Gateway and Wireless Routing Client mode)

The WAN setup allows you to set up the access point for broadband Internet connection.

Described below are the common steps you should start with to select or change the broadband connection type.

Changing WAN Type

Click on WAN Setup from the CONFIGURATION menu.

The setup page of the WAN type that you have last implemented will be displayed.

Since the access point operates in Dynamic IP Address Allocation mode by default, initially the Dynamic IP setup page will appear.

Press the Change button (which appears on the setup pages of all the WAN Types), to reach the Select WAN Type page.

Select the WAN type you want to switch to.

Click on Save.

The setup page of the WAN type that you have selected will then appear.

82