
Appendix I Troubleshooting
6.I want to set the access point to its factory default settings.
G.Power up the gateway.
H.Depress the Reset button situated at the back of the device and hold it for 2 to 10 seconds before releasing it.
7.My laptop is not able to access the AP.
I.In the Command Prompt, type ping 192.168.168.1 and press the Enter key. If you get a reply, your laptop is communicating with the gateway.
If you do NOT get a reply, please continue with the following steps.
J.Ensure whether your wireless card and driver have been properly installed.
Open the Control Panel.
If it does not, power down your laptop. Remove the wireless card from its slot and
If it does, click on it and press the Properties button. Check whether Device Status displays this message “This device is working properly”. If it does not, you will need to uninstall and
K.Verify whether your gateway and your laptop and/or other wireless clients have been configured with the same SSID, which is the
L.Check whether your gateway and your laptop are using the same frequency channel.
120