JVC LPT0923-001B manual Setting The Progressive Mode, Random Playback, Programme Playback

		BASIC OPERATIONS ON DVD DECK EN 33
Setting The Progressive Mode		4 Press 4. Playback starts in the programmed order.
		● When all of the programmed tracks have been played back,
		Programme Playback stops, but the programmed information
		remains.
		● To add tracks to the end of the programme, perform steps 1 through
You can obtain optimal picture quality by selecting whether the		3.
content on the disc is processed by field (video source) or by frame		● During Programme Playback, pressing 6 skips to the next
(film source).		selection of the programme. Pressing 2 returns to the beginning of
1 Press ON SCREEN twice to access the on-screen bar.		the current selection.
		To clear the on-screen bar and the contents of the programme
2 Press w e to select “	”, then press ENTER. The pop-up
		Press ON SCREEN.
window appears under the selected item.
		To cancel Programme Playback

TITLE 99 TRACK 99EACH 0:00

DVD-	3D-ON CINEMA AUTO 1
VIDEO

3 Press rt to select the desired option, then press ENTER.

AUTO 1: Used to play a disc containing both video and film source materials. This system recognizes the source type (video or film) of the current disc according to the disc information. Normally select this option.

AUTO 2: Almost the same as the “AUTO 1”, but the processing of the scenes with movement is different. Select “AUTO 1” or “AUTO 2” to your preference.

FILM: Suitable for playing back a progressive scanned film source disc.

Press w e to select “PRGM”, then press ENTER.

NOTE:

Programme Playback is not possible depending on the type of disc.

Random Playback

You can play back all the tracks on the disc in random order.

While stopped

1Press ON SCREEN twice to access the on-screen bar.

2Press w e to select “RND”, then press ENTER. Playback starts in random order.

VIDEO: Suitable for playing back a video source disc. The outlines		TRACK 99	EACH 0:00
on the played back pictures will be soft.				CINEMA
To clear the on-screen bar	VCD
Press ON SCREEN.

NOTE:

When the progressive mode is set, be sure to set “L-1 OUTPUT” to “COMPONENT”. ( pg. 61) Progressive scan is output only from COMPONENT VIDEO OUT connector.

Programme Playback

To clear the on-screen bar Press ON SCREEN.

To cancel Random Playback Perform steps 1 and 2.

NOTE:

You can programme up to 30 tracks (Video CD/SVCD or Audio CD) to play back in the desired order.

While stopped

1Press ON SCREEN twice to access the on-screen bar.

2Press w e to select “PRGM”, then press ENTER. The programme table appears under on-screen bar.

TRACK 99 EACH 0:00

CINEMA

VCD

3 Press the number keys to enter the track numbers in the desired order.

Examples:

ATo select track 5, press the

number key “5” and ENTER. B To select track 15, press the number key “1” and “5”.

CTo select track 25, press the number key “2” and “5”.

If you have specified a wrong selection

Press CANCEL (&). The last selection is erased.

Or press CLEAR (8). The whole selection is erased.

The same track will not be played back more than once during Random Playback.

Select The Switching Interval Of The Slide Show

You can control the switching interval of the slide show.

1Press ON SCREEN twice to access the on-screen bar.

2Press w e to select “ ”, then press ENTER. The pop-up window appears under the selected item.

GROUP 99 TRACK 99 EACH 179:59

5 SEC. CINEMA

R

3 Press rt to select the desired option, then press ENTER.

●Each time you press rt, the interval changes as follows:

5 SEC. { 10 SEC. { 15 SEC. { 20 SEC. { 25 SEC. { 30 SEC. { (Back to the beginning)

To clear the on-screen bar

Press ON SCREEN.