JVC LPT0923-001B manual Monitor Set, OUT, then press t, Pan&Scan/Letter Box

22 EN INITIAL SETTINGS

	Monitor Set	1 Press SET UP to access the Main Menu screen.
		● You cannot set the monitor type during recording or playback.
		2 Press w e to select “FUNCTION SET UP”, then press t.
You can select the monitor type depending on the TV used when
		3 Press w e to select “VIDEO IN/
you play back DVD VIDEO discs recorded for wide-screen TVs.
			DVD VIDEO SET UP	HDD/DVD SET UP	FUNCTION SET UP	INITIAL SET UP
		OUT”, then press t.	REC/PLAY SETUP	DISPLAY SET	VIDEO IN/OUT

●Turn on the unit.

●Turn on the TV and select the AV mode.

●Slide the TV/CABLE/SAT/DVD switch to DVD.

CABLE/SAT

TV DVD

4Press rt to select “MONITOR TYPE”, then press ENTER.

5Press rt to select the desired option, then press ENTER.

6Press SET UP to complete the setting.

MONITOR TYPE	4:3LB
F-1 INPUT	VIDEO
L-1 OUTPUT	SCART VIDEO
L-2 INPUT	VIDEO
L-2 SELECT	VIDEO

SET UP	ENTER	SELECT WITH [	] THEN PRESS [ENTER]
EXIT	SELECT	PRESS [SET UP] TO EXIT

ENTER

rtwe

SET UP

*The boldface settings below indicate the settings at your purchase.

8MONITOR TYPE — 4:3LB / 4:3PS / 16:9 AUTO / 16:9 FIX

4:3LB (Letter Box conversion): Select this when the aspect ratio of

your TV is 4:3 (conventional TV). While viewing a wide screen picture, the black bars appear on the top and the bottom of the screen.

4:3PS (Pan&Scan): Select this when the aspect ratio of your TV is 4:3 (conventional TV). While viewing a wide screen picture, the black bars do not appear; however, the left and right edges of the pictures will not be shown on the screen.

16:9 AUTO (Wide television conversion): Select this when the aspect ratio of your TV is 16:9 (wide TV).

16:9 FIX (Wide television conversion): Select this when the aspect ratio of your TV is fixed to 16:9 (wide TV). The unit automatically adjusts the screen width of the output signal correctly when playing back a picture whose aspect ratio is 4:3.

Pan&Scan/Letter Box

In general, DVD VIDEO disc are produced for a wide-screen TV with 16:9 aspect ratio.

Material with this ratio will not fit to a TV with 4:3 aspect ratio. There are two styles to display the image, “Pan&Scan” (PS) and “Letter Box” (LB).

Pan&Scan

The right and left side of the image are cut off.

The image fills the screen.

● The picture will be shown in the “4:3LB” mode depending on the disc even if the “4:3PS” mode is selected.

Letter Box

Black bands appear at the top and bottom of the image. The image itself appears in 16:9 aspect ratio.