JVC LPT0923-001B manual Output/Input Set, Output And L-1 Input Setting, Select Setting

		EDITING EN 61
Output/Input Set		COMPONENT: If a connected appliance’s input is compatible with
		Y/PB/PR signals, set to “COMPONENT”. You can obtain a high-
		quality Y/PB/PR picture. Switch the TV to the input that you can
● Turn on the TV and select the AV mode.		watch component video pictures.
● Slide the TV/CABLE/SAT/DVD switch to DVD.		8 L-1 INPUT — VIDEO / S-VIDEO
CABLE/SAT		VIDEO: If a connected appliance’s output is compatible only with
		regular video signals, set to “VIDEO”.
TV	DVD
		S-VIDEO: If a connected appliance’s output is compatible with Y/C
		signals, set to “S-VIDEO”. You can obtain a high-quality picture.
		(For connection, be sure to use a 21-pin SCART cable that is
		compatible with the Y/C signal.)
		NOTES:
		● If “L-1 OUTPUT” is set to “SCART S-VIDEO”, “SCART RGB” or
		“COMPONENT”, it is not possible to set “L-1 INPUT” to “S-VIDEO”.
		● If “L-2 SELECT” is set to “DECODER”, it is not possible to set “L-1
ENTER		INPUT” to “S-VIDEO”.
		● If “L-2 SELECT” is set to “DECODER”, it is only possible to set “L-1

rtwe	OUTPUT” to “SCART VIDEO”.
	● Component video signals are not output from the L-1 IN/OUT
	connector.
	● When Progressive scan mode is engaged, it is not possible to select
	the setting of “L-1 OUTPUT”. ( pg. 69)

SET UP

L-1 Output And L-1 Input Setting

The L-1 IN/OUT connector accepts and delivers either a composite signal (regular video signal) or a Y/C signal (a signal in which the luminance and chrominance signals are separated). Set “L-1 OUTPUT” and “L-1 INPUT” to the appropriate mode depending on the type of appliance connected to the unit’s L-1 IN/OUT connector.

1 Press SET UP to access the Main Menu screen.

2Press w e to select “FUNCTION SET UP”, then press t.

3Press w e to select “VIDEO IN/

OUT”, then press t.	DVD VIDEO SET UP HDD/DVD SET UP FUNCTION SET UP INITIAL SET UP
	REC/PLAY SET UP			DISPLAY SET	VIDEO IN/OUT
4 Press rt to select “L-1
		MONITOR TYPE				4 : 3LB
OUTPUT” or “L-1 INPUT”, then		F-1 INPUT				VIDEO
		L-1 OUTPUT				SCART VIDEO
press ENTER.
		L-1	INPUT			VIDEO
		L-2	SELECT			VIDEO

L-2 Select Setting

Set “L-2 SELECT” to the appropriate mode depending on the type of appliance connected to the unit’s L-2 IN/DECODER connector.

1Perform steps 1 and 2 of “L-1 Output And L-1 Input Setting” on the left column.

2Press rt to select “L-2 SELECT”, then press ENTER.

3Press rt to select the

appropriate setting, then press	DVD VIDEO SET UP	HDD/DVD SET UP	FUNCTION SET UP	INITIAL SET UP
	REC/PLAY SET UP	DISPLAY SET	VIDEO IN/OUT

ENTER.	MONITOR TYPE			4 : 3LB
4 Press SET UP to complete the	F-1 INPUT			VIDEO
	L-1 INPUT			VIDEO
setting.	L-1 OUTPUT			SCART VIDEO
				VIDEO
	L-2 SELECT			S-VIDEO
				VIDEO
				SAT VIDEO
* The boldface settings below	SET UP	ENTER	SELECT WITH [	SAT S-VIDEO
				] THEN PRESS [ENTER]
				DECODER
indicate the settings at your	EXIT	SELECT	PRESS [SET UP] TO EXIT
purchase.

8L-2 SELECT — VIDEO / S-VIDEO / SAT VIDEO / SAT

S-VIDEO / DECODER

Select “VIDEO” or “S-VIDEO” to use this unit as the recording deck with the player connected to the L-2 IN/DECODER connector, or to use the satellite receiver connected to the L-2 IN/DECODER connector.

VIDEO: If a connected appliance’s output is compatible only with regular video signals, set to “VIDEO”.

5 Press rt to select the appropriate setting, then press

ENTER.

6 Press SET UP to complete the setting.

*The boldface settings below indicate the settings at your purchase.

SET UP	ENTER	SELECT WITH [	] THEN PRESS [ENTER]
EXIT	SELECT	PRESS [SET UP] TO EXIT

DVD VIDEO SET UP		HDD/DVD SET UP	FUNCTION SET UP			INITIAL SET UP
REC/PLAY SET UP		DISPLAY SET	VIDEO IN/OUT
	MONITOR TYPE			4 : 3LB
	F-1 INPUT				VIDEO
	L-1 INPUT			SCART VIDEO
	L-1 OUTPUT				VIDEO
						SCART VIDEO
	L-2 SELECT				VIDEOSCART S-VIDEO
						SCART RGB
						COMPONENT

SET UP	ENTER	SELECT WITH [	] THEN PRESS [ENTER]
EXIT	SELECT	PRESS [SET UP] TO EXIT

S-VIDEO: If a connected appliance’s output is compatible with Y/C signals, set to “S-VIDEO”. You can obtain high-quality picture. (For connection, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.)

Select “SAT VIDEO” or “SAT S-VIDEO” to view a satellite programme with the TV set while the unit is turned off. ( pg. 65) SAT VIDEO: If a connected satellite receiver’s output is compatible

only with regular video signals, set to “SAT VIDEO”. SAT S-VIDEO: If a connected satellite receiver’s output is

8L-1 OUTPUT — SCART VIDEO / SCART S-VIDEO / SCART

RGB / COMPONENT

SCART VIDEO: If a connected appliance’s input is compatible only with regular video signals, set to “SCART VIDEO”.

SCART S-VIDEO: If a connected appliance’s input is compatible with Y/C signals, set to “SCART S-VIDEO”. You can obtain high- quality picture. (For connection, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.)

SCART RGB: If a connected appliance’s input is compatible with RGB signals, set to “SCART RGB”. You can obtain a high-quality RGB picture.

compatible with Y/C signals, set to “SAT S-VIDEO”. You can obtain a high-quality S-VHS picture. (For connection, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.)

DECODER: To use a decoder connected to the L-2 IN/DECODER connector.