JVC LPT0923-001B manual Scan Mode Set, Press Progressive Scan for 3 or more seconds

Page 69

SUBSIDIARY SETTINGS EN 69

DISPLAY SET

8SUPERIMPOSE — OFF / AUTO

When this function is set to “AUTO”, various operational indicators appear on the TV screen. Messages appear in the selected language. ( pg. 21)

OFF: To turn off superimposed indications.

AUTO: To superimpose operational indications for approximately five seconds just after the corresponding operation.

NOTES:

●Even when “SUPERIMPOSE” is set to “OFF”, you can display the various operational indicators by pressing ON SCREEN. To clear the operational indicators, press ON SCREEN again.

●When you use this unit as the source player for editing, be sure to set “SUPERIMPOSE” to “OFF” before starting. ( pg. 60)

●When you select “AUTO”, during playback, the operation mode indicators may be disturbed depending on the type of disc being used.

8BLUE BACK — ON / OFF

When this function is set to “ON”, the TV screen becomes all blue when receiving a channel not in use.

NOTE:

When you want to receive an unstable channel with poor signals, set this function to “OFF”.

8DIMMER — BRIGHT / DIMMED1 / DIMMED2 / OFF

You can change the brightness of the front display panel.

BRIGHT: Normally select this.

DIMMED1/DIMMED2: To change the brightness level. (Blue lamp on the front display panel becomes dimmer.)

OFF: To dim the front display panel. (Blue lamp on the front display panel is turned off.)

8POWER SAVE — OFF / ON

When this function is set to “ON”, you can reduce the power consumption while the unit is turned off.

NOTES:

●During Power Save mode —

—the front display panel will be turned off.

—the Just Clock function ( pg. 73) does not work.

●Power Save does not work when —

—the unit is in the Timer mode.

—the unit’s power is turned off after timer-recording or Instant Timer Recording.

—the Automatic Satellite Programme Recording mode is engaged. ( pg. 48)

—“L-2 SELECT” is set to “DECODER”, “SAT VIDEO” or “SAT S-VIDEO”. ( pg. 61)

●It takes some time for the unit to complete initialisation after you turn on the unit power, with “WAKE UP” blinking on the front display panel.

8ON SCREEN LANGUAGE

This unit offers you the choice to view on-screen messages in 10 different languages. Though Auto Set Up selects the language automatically ( pg. 20), you can change the language setting manually as required.

For details, refer to “On-screen Language Set” ( pg. 21).

Scan Mode Set

If you connect the unit and TV with Component Video Connection ( pg. 17), you can select the scan mode from two modes: Interlaced scan mode which is used in the conventional TV system, and Progressive scan mode which enables reproduction of higher- quality images.

8Interlaced scan

In the conventional video system, a picture is shown on the display monitor in two halves. The Interlaced scan system places lines of the second half of the picture in-between lines of the first half of the picture.

8Progressive scan

Progressive scan displays all the horizontal lines of a picture at one time, as a single frame. This system can convert the interlaced video from DVD into progressive format for connection to a progressive display. It dramatically increases the vertical resolution.

ATTENTION:

Your TV needs to be compatible with PAL Progressive.

●Turn on the unit.

●Turn on the TV and select the AV mode.

●Slide the TV/CABLE/SAT/DVD switch to DVD.

CABLE/SAT

TVDVD

PROGRESSIVE SCAN

1 Press PROGRESSIVE SCAN for 3 or more seconds.

●Video output indicator () lights on the front display panel if Progressive scan mode has been established. ( pg. 12)

●Each press of PROGRESSIVE SCAN for 3 or more seconds switches the scan mode.

NOTES:

●When the progressive mode is set, be sure to set “L-1 OUTPUT” to “COMPONENT”. ( pg. 61) Progressive scan is output only from COMPONENT VIDEO OUT connector.

●Interlaced scan mode is the setting at your purchase.

●Interlaced scan mode might be suitable depending on video material.

●Scan mode cannot be set while menu screen is displayed.

●When Progressive scan mode is engaged, no video signal is output from S-VIDEO OUT connector and L-1 IN/OUT connector.

Page 68 Page 70
Image 69
Page 68 Page 70
Contents DR-MH30S DR-MH20S Safety Precautions Do not place the unit For ItalyDo not block the unit’s ventilation openings or holes To mobile phone usersContents Recordable/playable Discs About DiscsDVD-RAM Discs DVD-R/RW DiscsRegion Number Discs For Playback OnlyVideo CD/Super Video CD Audio CDFile Structure Of Discs Recording Medium And FormatPlacing a Disc DVD Video MarksCare And Handling Of Discs Maintenance of discsLabel side Recording sideFront View To access covered connectors, pull Open the connector coverRear View C D E F G HFront Display Panel How To Use Remote ControlWhen pressing 7 during recording When pressing REC ModeWhen recording On-Screen Display DVD deckWhen watching a programme on air When playing back a recorded titleWhen using Live Memory playback When recording When pressing REC Mode Appears for eight secondsOn-Screen Display DV Dubbing When capturing images from the external DV equipmentConnected DV equipment information Elapsed recording timeBasic Connections When your TV’s Scart Set L-1 Output to Connector acceptsAfter Auto Set Up is completed, perform Monitor Set on Auto Set UpBefore starting, make sure of the following ENTER. The Language SetPreset Download Set/Auto Guide Program Number SetWeNOTES Link Functions On The Front Display PanelLanguage Press SET UP to complete the settingOn-screen Language Set Press rt to select MenuOUT, then press t Monitor SetPan&Scan/Letter Box Pan&ScanInstalling Satellite Controller 60, 61, 62, 63 Check the result of the test64, 65 64, 78Basic Playback High-Speed Search Playback FeaturesSlow Motion Still Picture/Frame-By-Frame PlaybackSkip Search To mark positionsSubtitle Selection Checking The Time Information Angle SelectionPlayback Control PBC Function Audio Language/Sound SelectionAudio Channel Selection One Touch Replay FunctionHow To Access The On-screen Bar Using The On-screen BarContents of the on-screen bar during playback Basic Operation On The On-screen BarRepeat Playback Adjusting The Picture Quality Simulated Surround EffectTime Search Setting The Progressive Mode Random PlaybackProgramme Playback Parental Lock To Change The SettingsTo Set Parental Lock For The First Time To Temporarily Release Parental LockRecording Mode Basic RecordingRecording Resume Function Instant Timer Recording ITR Recording FeaturesWatch Another Programme While Recording On The Unit Elapsed Recording Time And Disc Remaining Time IndicationFree Rate Function Select FR Just in a recording mode selection procedureSelection Of The Audio Channel To Be Recorded On a Disc Type of Broadcast BeingPause recording on HDD deck Receiving Stereo And Bilingual Programmes During playback, press Basic Playback Playback FeaturesTemporary recording for Live Memory Live Memory PlaybackRecording/playback Status Display About limitation on temporary recordingMessage appears by pressing this button during timer Returns to on air programme screen. When a confirmationAvailable only when paused Previous screenJump Search 5x Speed SearchTo Resume Playback Of a TV Broadcast From The Paused Point Press Jump or Jump +Satellite Receiver Users VPS/PDC Recording Weekly/Daily RecordingFor the HDD deck For the DVD deckRelief Recording Manual Timer ProgrammingCheck Programmes Cancel And Change ProgrammesPress REC Mode repeatedly to set the recording mode Automatic Satellite ProgrammeRecording About registration of information Limitations of registrationIcons and their meanings Scan For Beginning Of Title Modify Original InformationModify Index Modify Title NameProtect Title DVD deck only Modify CategoryDelete Title To modify the points Press Edit or ReturnDivide Title Modify Play List InformationModify Chapter Press w e to select PREVIEW, then press EnterAdd scenes Create Play ListMove Scenes Delete ScenesDelete Play List Modify Library InformationModify Play List Name Scan For Title From LibraryPress Navigation Locating The Desired Group And TracksDubbing Cancel Select this to cancel dubbing operationJust Dubbing From HDD To DVD High Speed Dubbing From HDD To DVDWhen performing the Manual Dubbing When performing the Just DubbingManual Dubbing From HDD To DVD Original Dubbing From DVD To HDDWhen you dub from DV equipment other than a camcorder DV DubbingTo skip unwanted part of the source picture If the camcorder has no S-VIDEO output connector If the camcorder has an S-VIDEO output connectorEdit From a Camcorder When using your unit as the source player Output And L-1 Input Setting Select SettingOutput/Input Set Input Setting Digital Audio DubbingExample Dubbing to an MD Remote Control 1/2/3/4 Code Switching Remote Control FunctionsTV Multi-Brand Remote Control Press the corresponding buttons to operate the TV 1, TV AVReceiver 1, PR +/-,number keys Perfect Connections Recommended Simple ConnectionsOr An Amplifier With Built-in DTS Connecting/Using a DecoderPress rt to select Audio Mode SetREC, then press Enter Press rt to select the desiredThis function works only for the Nicam bilingual programme Disc Play SET UP REC/PLAY SET UPDuring Power Save mode Scan Mode SetPower Save does not work when Scan mode cannot be set while menu screen is displayedTuner Set Showviewtm System SetupGuide Program Number Set Auto Channel SetManual Channel Set Fine-Tuning Channels Already Stored When Receiving a Scrambled Broadcast Set Stations BDelete a Channel Change Station Channel PositionJust Clock Clock SetFormat a Disc DVD Deck Only Impossible to restore themUP, then press t Some DVD-RAM/RW discs are unformattedAfter finalising For DVD-R/RW Video mode discs Cancel The Finalisation Of a DVD-RW DiscFinalise a Disc DVD Deck Only Finalise a DVD-R/RW DiscTray Lock DVD Deck Only Help FunctionTo lock tray To unlock trayInitialising DVD Deck Only Playback DVD DeckGeneral Playback HDD DeckPower failure occurred Set date and time correctly.  pg Timer RecordingRecording DVD Deck Recording HDD DeckOn-screen Message Other ProblemsFor basic/S-video connection For component video connectionTimer recording has finished during Live Memory playback An invalid Showview number has been input.  pgDuring Live Memory playback, 8 has been pressed.  pg Power consumption Power requirementTemperature Dimensions WxHxDLanguage Code List Country/Area Code List for Parental Lock EN Appendix TV Station And ID List Audio Language/Sound Selection Select The Switching Interval Of The Slide ShowElapsed Recording Time Indication Still Picture/Frame-By-Frame PlaybackMemo EN DR-MH30S DR-MH20S
Top Page Image Contents