JVC LPT0923-001B manual Delete a Channel, Change Station Channel Position

Page 72

72 EN SUBSIDIARY SETTINGS

Delete A Channel

Set Stations (A)

1 Perform steps 1 5 of “Manual Channel Set” ( pg. 71).

2 Press rt w e to select the channel you want to delete.

3 Press & to delete a channel. The channel next to the cancelled one moves up one line.

Repeat steps 2 3 as necessary.

4 Press SET UP to close the Confirmation screen.

Change Station Channel Position

1 Perform steps 1 4 of “Manual Channel Set” ( pg. 71).

2Press w e to select “MOVE”, then press ENTER.

3Press rt w e to select the channel you want to move, then press ENTER.

Set station names that are registered in your unit.

1Perform steps 1 5 of “Manual Channel Set” ( pg. 71).

2Press rt w e to select the channel you want to modify, then press ENTER. The Confirmation screen appears.

3Press rt to select “ID”, then press ENTER.

4Move the arrow to the left ID selection column. Registered station names (ID) ( pg. 85) appear as you press rt.

5Press ENTER to select the desired ID, then press ENTER again to select “OK”.

6Press RETURN to return to the Manual Channel Set screen.

Repeat steps 2 5 as necessary.

7 Press SET UP to close the Confirmation screen.

4 Press rt w e to select the new channel position, then press

ENTER.

Example: If you moved the station in position 4 to position 2, the stations originally in positions 2 and 3 each move down one space.

INITIAL SET UP > MANUAL CH SET

 

 

 

INITIAL SET UP > MANUAL CH SET

 

 

PR

CH

ID

CH

CH

ID

PR

CH

ID

CH

CH

ID

01

C01

----

07

 

----

01

C01

----

07

 

----

02

02

CTEA

08

 

----

02

C79

3SAT

08

 

----

03

05

1000

09

 

----

03

02

CTEA

09

 

----

04

C79

3SAT

10

 

----

04

05

1000

10

 

----

05

01

9LIV

11

 

----

05

01

9LIV

11

 

----

06

04

AB3

12

 

----

06

04

AB3

12

 

----

<

>

MOVE

 

EDIT

RETURN

<

>

 

MOVE

EDIT

RETURN

Repeat steps 3 4 as necessary.

5 Press SET UP to close the Confirmation screen.

When Receiving A Scrambled Broadcast

Set Stations (B)

Set station names other than the ones registered in your unit.

1Perform steps 1 5 of “Manual Channel Set” ( pg. 71).

2Press rt w e to select the channel you want to modify, then press ENTER. The Confirmation screen appears.

3Press rt to select “ID”, then press ENTER.

4Press rt w e to select the desired characters (A–Z, 0–9, –, f, +, I (space)), then press ENTER.

Enter the remaining characters the same way (maximum of 4).

5After entering all characters, press rt w e to select “OK”, then press ENTER.

6Press RETURN to return to the Manual Channel Set screen.

Repeat steps 2 5 as necessary.

7 Press SET UP to close the Confirmation screen.

NOTE:

1Set “L-2 SELECT” to “DECODER”. ( pg. 61)

2Perform steps 1 5 of “Manual Channel Set” ( pg. 71).

3Press rt w e to select the channel position broadcasting scrambled programmes, then press ENTER. The Confirmation screen appears.

4Press rt to select “DECODER”, then press ENTER.

5Press rt to set “DECODER” to “ON”, then press ENTER.

6Press RETURN to return to the Manual Channel Set screen.

Repeat steps 3 5 as necessary.

7Press SET UP to close the Confirmation screen.

INFORMATION

If you live in Eastern Europe, “TV SYSTEM” setting appears instead of “DECODER” setting on the Manual Channel Set screen. When you can see the picture but can hear no audio, select appropriate TV system (D/K or B/G). Normally, TV programmes are broadcast as follows.

For Eastern Europe : D/K

For Western Europe : B/G

ASelect a country in Eastern Europe in step 5 of “Auto Channel Set” ( pg. 70).

B Press rt to select “TV SYSTEM” in step 7 of “Manual Channel Set” ( pg. 71).

C Press rt to select appropriate TV System (D/K or B/G).

The characters available for the station name (ID) are A–Z, 0–9, –, f, +, I (space) (maximum of 4).

Fine-Tuning Channels Already Stored

1Perform steps 1 5 of “Manual Channel Set” ( pg. 71).

2Press rt w e to select the channel you want to fine-tune, then press ENTER. The Confirmation screen appears.

3Press rt to select “FINE”, then press ENTER.

4Press rt until the picture appears in its best quality, then press

ENTER.

Repeat steps 2 4 as necessary.

5Press RETURN to return to the Manual Channel Set screen.

6Press SET UP to close the Confirmation screen.

Image 72
Contents DR-MH30S DR-MH20S Safety Precautions For Italy Do not place the unitDo not block the unit’s ventilation openings or holes To mobile phone usersContents About Discs Recordable/playable DiscsDVD-RAM Discs DVD-R/RW DiscsDiscs For Playback Only Region NumberVideo CD/Super Video CD Audio CDRecording Medium And Format File Structure Of DiscsDVD Video Marks Placing a DiscMaintenance of discs Care And Handling Of DiscsLabel side Recording sideTo access covered connectors, pull Open the connector cover Front ViewC D E F G H Rear ViewFront Display Panel Remote Control How To UseWhen pressing REC Mode When pressing 7 during recordingWhen recording On-Screen Display DVD deckWhen playing back a recorded title When watching a programme on airWhen using Live Memory playback When recording When pressing REC Mode Appears for eight secondsWhen capturing images from the external DV equipment On-Screen Display DV DubbingConnected DV equipment information Elapsed recording timeWhen your TV’s Scart Set L-1 Output to Connector accepts Basic ConnectionsAuto Set Up After Auto Set Up is completed, perform Monitor Set onBefore starting, make sure of the following ENTER. The Language SetPreset Download Set/Auto Guide Program Number SetWeNOTES On The Front Display Panel Link FunctionsPress SET UP to complete the setting LanguageOn-screen Language Set Press rt to select MenuMonitor Set OUT, then press tPan&Scan/Letter Box Pan&ScanInstalling Satellite Controller Check the result of the test 60, 61, 62, 6364, 65 64, 78Basic Playback Playback Features High-Speed SearchStill Picture/Frame-By-Frame Playback Slow MotionSkip Search To mark positionsAngle Selection Subtitle Selection Checking The Time InformationAudio Language/Sound Selection Playback Control PBC FunctionAudio Channel Selection One Touch Replay FunctionUsing The On-screen Bar How To Access The On-screen BarContents of the on-screen bar during playback Basic Operation On The On-screen BarRepeat Playback Adjusting The Picture Quality Simulated Surround EffectTime Search Setting The Progressive Mode Random PlaybackProgramme Playback To Change The Settings Parental LockTo Set Parental Lock For The First Time To Temporarily Release Parental LockRecording Mode Basic RecordingRecording Resume Function Recording Features Instant Timer Recording ITRWatch Another Programme While Recording On The Unit Elapsed Recording Time And Disc Remaining Time IndicationSelect FR Just in a recording mode selection procedure Free Rate FunctionSelection Of The Audio Channel To Be Recorded On a Disc Type of Broadcast BeingPause recording on HDD deck Receiving Stereo And Bilingual Programmes Basic Playback Playback Features During playback, pressLive Memory Playback Temporary recording for Live MemoryRecording/playback Status Display About limitation on temporary recordingReturns to on air programme screen. When a confirmation Message appears by pressing this button during timerAvailable only when paused Previous screen5x Speed Search Jump SearchTo Resume Playback Of a TV Broadcast From The Paused Point Press Jump or Jump +Satellite Receiver Users Weekly/Daily Recording VPS/PDC RecordingFor the HDD deck For the DVD deckManual Timer Programming Relief RecordingCancel And Change Programmes Check ProgrammesPress REC Mode repeatedly to set the recording mode Automatic Satellite ProgrammeRecording About registration of information Limitations of registrationIcons and their meanings Modify Original Information Scan For Beginning Of TitleModify Index Modify Title NameModify Category Protect Title DVD deck onlyDelete Title To modify the points Press Edit or ReturnModify Play List Information Divide TitleModify Chapter Press w e to select PREVIEW, then press EnterCreate Play List Add scenesMove Scenes Delete ScenesModify Library Information Delete Play ListModify Play List Name Scan For Title From LibraryLocating The Desired Group And Tracks Press NavigationCancel Select this to cancel dubbing operation DubbingJust Dubbing From HDD To DVD High Speed Dubbing From HDD To DVDWhen performing the Just Dubbing When performing the Manual DubbingManual Dubbing From HDD To DVD Original Dubbing From DVD To HDDWhen you dub from DV equipment other than a camcorder DV DubbingTo skip unwanted part of the source picture If the camcorder has no S-VIDEO output connector If the camcorder has an S-VIDEO output connectorEdit From a Camcorder When using your unit as the source player Output And L-1 Input Setting Select SettingOutput/Input Set Input Setting Digital Audio DubbingExample Dubbing to an MD Remote Control Functions Remote Control 1/2/3/4 Code SwitchingTV Multi-Brand Remote Control Press the corresponding buttons to operate the TV 1, TV AVReceiver 1, PR +/-,number keys Simple Connections Perfect Connections RecommendedConnecting/Using a Decoder Or An Amplifier With Built-in DTSMode Set Press rt to select AudioREC, then press Enter Press rt to select the desiredDisc Play SET UP REC/PLAY SET UP This function works only for the Nicam bilingual programmeScan Mode Set During Power Save modePower Save does not work when Scan mode cannot be set while menu screen is displayedShowviewtm System Setup Tuner SetGuide Program Number Set Auto Channel SetManual Channel Set When Receiving a Scrambled Broadcast Set Stations B Fine-Tuning Channels Already StoredDelete a Channel Change Station Channel PositionClock Set Just ClockImpossible to restore them Format a Disc DVD Deck OnlyUP, then press t Some DVD-RAM/RW discs are unformattedCancel The Finalisation Of a DVD-RW Disc After finalising For DVD-R/RW Video mode discsFinalise a Disc DVD Deck Only Finalise a DVD-R/RW DiscHelp Function Tray Lock DVD Deck OnlyTo lock tray To unlock trayPlayback DVD Deck Initialising DVD Deck OnlyGeneral Playback HDD DeckTimer Recording Power failure occurred Set date and time correctly.  pgRecording DVD Deck Recording HDD DeckOther Problems On-screen MessageFor basic/S-video connection For component video connectionTimer recording has finished during Live Memory playback An invalid Showview number has been input.  pgDuring Live Memory playback, 8 has been pressed.  pg Power requirement Power consumptionTemperature Dimensions WxHxDLanguage Code List Country/Area Code List for Parental Lock EN Appendix TV Station And ID List Select The Switching Interval Of The Slide Show Audio Language/Sound SelectionElapsed Recording Time Indication Still Picture/Frame-By-Frame PlaybackMemo EN DR-MH30S DR-MH20S