PeripheralEquipment Connections | JVC 1004MKH-VT-VT specification

•Teletext page number will be displayed on the upper left corner of the screen when the selected page is found.

•Press ““ button to display the selected Teletext page.

To exit Teletext

•Press “” button. The screen will switch to TV mode.

Fastext and Toptext

Your TV supports the 7 page Teletext system. When the page number of any of the 7 pages in memory is entered, the system will not search for the requested page; instead it will display the page automatically.

•Press “ “ button to move the Teletext screen forward one page at a time.

•Press “ ” button to move the Teletext screen backward one page at a time.

For Fastext and Toptext

The subject-heading for the information may have a particular colour.

•Press an appropriate RED, GREEN, YELLOW or BLUE button in order to reach the relevant page quickly.

For TOPTEXT

If Toptext transmission is present, colour coded buttons will appear in status row.

If Toptext transmission is not present, status row will not appear.

In Toptext mode the “ “ or “ ” com- mands will request the next or previous page respectively. If Toptext transmission is not avail- able, in case of operation of these commands, wraparound occurs. For example page 100 appears to be one greater than page 199.

PeripheralEquipment

Connections

There is a wide range of audio and video equip- ment that can be connected to your TV.

Connection diagrams at the and of this section show you where the different equipment should be connected at the back side of the TV.

Via the Euroconnector

Your TV set has 2 Euroconnector sockets. If you want to connect peripherals (e.g. video, decoder, etc.) which have Euroconnectors, to your TV, use SCART input.

If an external device is connected via Euro- connector sockets TV is switched to AV mode automatically. In this case if both sockets are connected SCART-1 has the precedence.

T-V LINK compatible VCR

Be sure to connect the T-V LINK compatible VCR to the EXT.2 terminal. If not, the T-V LINK function will not work properly.

•When connecting a T-V LINK compatible VCR to the EXT.2 terminal, be sure to connect the decoder to the VCR. If not, the T-V LINK func- tion may not work properly. And then set the DECODER(EXT-2) function for the channel to ON to unscramble a scrambled channel.

RGB mode

If an equipment can output the RGB signals, connect it to the EXT-1 or EXT-2 terminal.

EXT-2 S Mode

If the equipment connected to your TV set sup- ports S-Video (Y/C) output from Euroconnec- tor, you can have a better picture quality by selecting EXT-2 S mode and connecting your equipment to the EXT.2 (EXT-2 S) terminal of TV. See your equipment's booklet to check if your equipment has such feature.

Via the RCA jacks

If you have an equipment (such as a Cam- corder) which has the RCA jacks, connect it to the EXT-4 terminal with the video and audio cables.

- 26 -