MenuSystem

Programme Selection (Previous or next programme)

•Press “” button to select the previous programme.

•Press “ “ button to select the next programme.

Programme Selection (direct access):

Press digit buttons on the remote control hand- set to select programmes between 0 and 9. TV will switch to the selected programme. To select programmes between 10 - 99, press the digit buttons consecutively which programme you want to select (eg. for programme 27, first press 2 and then 7). When it is late to press second digit button only the first digit programme will be displayed. The limit of the delay time is 3 seconds

.Example: PR6 press 6, PR12 press 1and 2 , PR123 press 1,2 and 3.

Press directly the programme number to reselect single digit programmes.

Hint: The channel list numbers are assigned by the broad- casters. Because not all channels are broadcast free-to-air and stored by the receiver, the channel list numbers do not run continuously. The fifteenth channel in the list, for ex- ample, may not be channel number 15 but channel number

17.

Your TV has been designed with a menu sys- tem to provide an easy manipulation of a multi- function system. The TV is controlled by choos- ing the commands, which are displayed on the screen.

MAIN MENU

Press the "MENU" button. The main menu will be displayed in the middle of the screen.

To select a sub-menu use “ “ or “ ” but-

ton, and press “ “ or “ ” button or directly press “OK” button.

In EXT-1, EXT-2 and EXT-4 modes, main menu appears the same as in TV mode but without Program sub-menu.

In EXT-3 mode, Main Menu appears as fol- lows:

Menu does not disappear automatically if it is left on the screen.

Press “MENU” button again to remove menu.

Picture Menu

Press “MENU” button, now you are in main menu. In the Main menu, select “Picture”

using “ “ or “ ” button, then enter the Pic-

ture menu pressing “ “ / “ ” or “OK” but- ton.

Setting Mode

•As you enter the picture menu, Mode will be the first item.

ENGLISH - 14 -