JVC 1004MKH-VT-VT manual To start the search process, press

To Store Settings

Selecting Sound System

In Feature menu all settings are stored auto-

Using “ “ or “ ” button on Sound System,

matically.

you can change the standard to BG, DK, I, L,

Install Menu

Lp.

Press "MENU" button, now you are in main

Selecting Fine Tuning

menu. In the main menu, select “Install”

You can use the Fine Tuning process for fine

using

“ or “

” button. Then enter the In-

adjustment (after coarse adjustment), if you

stall menu pressing“

“ /

“

” or “OK” but-

are not happy about the image on the screen.

ton.

Use “ “ or “

” button on Fine Tuning item,

until getting the best image on the screen.

Selecting Search

” button

To start the search process, press

“

for forward search or “

“ button for backward

search. If a signal is found or reaches to end

of the band after searching, press “

“ or “ ”

buttons to continue search process. To stop

the search process

when you want, press

“ “ or “ ” buttons at any time.

In EXT mode, Install menu

appears like this:

Decoder(EXT-2)

You can use this mode to connect any de-

coder to your TV.

” buttons to set it “On” or

• Press the“

“ or “

You can change only Colour system and

“Off”.

VCR.

When you select Decoder(EXT-2) “On”,

Selecting Programme

EXT-2 output will be chosen as TV mode only

• Using “

“ or “

” button select Programme.

and any scrambled channels will be un-

scrambled through decoder connected your

•To select programme number, you can use

TV via EXT-2 output.

“ “ / “

” button or Digit Buttons

Setting VCR ( Video Cassette Recorder )

Selecting Band

Mode

Band, can be chosen either,

• This item can be seen in TV, EXT-1, EXT-2,

• “C” or “S” by “

“ or “

” button.

EXT-3 and EXT-4 modes.

• If you want to watch a VCR source from one of

Selecting Channel

these modes, then

it will be better to set

Channel can be changed by “

“ or “ ” but-

VCR mode “On”. For this, while the cursor is

ton or by Digit Buttons.

on this item press the“

“ or “

” buttons to

Selecting Colour System

set it “On”.

• If you want to watch a DVD , then you must set

Using “

“ or “

” button on Colour System,

this item “off”; because DVD is not a source

you can change the colour system to PAL,

like a VCR and to see the picture better, you

SECAM or Auto.

must set the VCR mode “Off”.

Note: In EXT mode, you can choose NTSC 3.58 and NTSC 4.43 as well.

- 18 -