Operating with Remote Control

download was not performed correctly. Before trying to download again, check that:

•The VCR power is turned on.

•The VCR is T-V Link compatible.

•The VCR is connected to the Ext-2.

•The scart cable is fully wired. Direct REC:

You can easily record to VCR the images that you are watching on the TV. For details, read the manual for your VCR. Use your VCR con- trols you can not carry out Direct REC using your TV control.

When the VCR is not ready (For example when there is no tape inserted), “NO RECORDING” is displayed. In the following situations, the VCR will stop recording if the Tv is turned off, if the TV channel or input is changed, or if the menu is displayed on the TV:

•When recording images from an external device connected to TV (For example camcorder).

•When recording a TV channel after it has been unscrambled on a decoder.

•When recording a TV channel by using the TV’s output because the VCR’s own tuner can not properly receive that channel.

TV autopower on/VCR image view:

When the VCR starts playing, the TV automati- cally turns on and images from EXT-2 appear on the screen.

This function does not happen if your TV’s main power is turned off. Set your TV’s main power to on (StandBy Mode).

Operating the TV

You can operate your TV both using the re- mote control handset and onset buttons.

Volume setting and programme selection can be made by using the buttons at the control panel on the right side of the TV.

Volume Setting

•Press “ -” button to decrease volume or “ +” button to increase volume, so a vol- ume level scale (slider) will be displayed at the middle of the bottom on the screen.

Programme Selection

•Press “” button to select the next pro- gramme or “” button to select the previ- ous programme.

Entering Main Menu

•Press "MENU" button to enter Main menu. In the Main menu select submenu using “” or “” button and enter the sub-

menu using“ -” or “ +” button. To learn the usage of the menus, refer to the Menu System sections.

The remote control handset of your TV is de- signed to control all the functions of the model you selected. The functions will be described in accordance with the menu system of your TV.

Functions of the menu system are described in following sections.

Volume Setting

Press “ +” button to increase volume.

Press “ -” button to decrease volume. A volume level scale (slider) will be displayed in the middle at the bottom of the screen.

ENGLISH - 13 -