Program Menu

•If you want to watch a VCR source from one of these modes, then it will be better to set VCR mode “on”. For this, while the cursor is

on this item press the““ or “” buttons to set it “On”.

•If you want to watch a DVD , then you must set this item “off”; because DVD is not a source like a VCR and to see the picture better, you must set the VCR mode “Off”.

To Store Settings

•Press ““ / “” or “OK” button on Store option to store Install menu settings.

•After stored, T-V Link menu will appear. If you do not need to do T-V Link, press BLUE but- ton to exit the menu.

Press "MENU" button, now you are in main menu. In the main menu, select “Program”

using “ “ or “ ” button. Then enter the

Programme menu, press ““ / “” or “OK” button.

Note: There is no Program menu in any EXT modes.

Program Menu is used to delete a channel, to change the programme number of a channel, to give a channel name to a channel, and to start the A.P.S (Autostore) function.

To choose a channel in the Program menu

	Press “ “ / “ ” / “ “ / “ ” button. The
programme number that you choose is high-
lighted in the Program.
I	ENGLISH

Caution:

Using “Delete” or “Insert” function rewrite the current chan- nel list in the Program menu. Therefore, the programme num-

bers of some of channels will change.

When you complete the settings of Program menu:

If you have a T-V Link compatible VCR, press

“” button to display the T-V Link menu. then follow the operating procedure “Downloading the data to VCR”

If you do not have a T-V Link compatible VCR, press BLUE button to exit the menu.

To give a channel name (Name):

1.Choose the channel you want to give a chan- nel name.

2.Press the RED button to enter the Name mode.

3.Press “ “ or “ ” button to choose the position,and press “ “ or “” button to choose each character of channel name.

4.Press the RED button to store the channel name.

•To cancel the Name mode, press the BLUE button.

To delete a channel (Delete):

1.Choose the channel you want to delete.

2.Press the YELLOW button to enter the De- lete mode.

3.Press the YELLOW button to delete it.

•To cancel the Delete mode, press the BLUE button.

To change the programme number of a channel (Insert)

1.Choose the channel you want to change the programme number.

2.Press the GREEN button to enter the Insert mode.

-19 -

Program Menu

ENGLISH