Install Menu

To Store Settings

In Feature menu all settings are stored auto- matically.

Press "MENU" button, now you are in main menu. In the main menu, select “Install”

using “ or “ ” button. Then enter the In-

stall menu pressing““ / “” or “OK” but- ton.

In EXT mode, Install menu appears like this:

You can change only Colour system and VCR.

Selecting Programme

•Using “ “ or “ ” button select Programme. •To select programme number, you can use

““ / “” button or Digit Buttons Selecting Band

Band, can be chosen either,

•“C” or “S” by ““ or “” button. Selecting Channel

Channel can be changed by ““ or “” but- ton or by Digit Buttons.

Selecting Colour System

Using ““ or “” button on Colour System, you can change the colour system to PAL, SECAM or Auto.

Note: In EXT mode, you can choose NTSC 3.58 and NTSC 4.43 as well.

Selecting Sound System

Using ““ or “” button on Sound System, you can change the standard to BG, DK, I, L, Lp.

Selecting Fine Tuning

You can use the Fine Tuning process for fine adjustment (after coarse adjustment), if you are not happy about the image on the screen.

Use ““ or “” button on Fine Tuning item, until getting the best image on the screen.

Selecting Search

To start the search process, press “” button

for forward search or ““ button for backward search. If a signal is found or reaches to end

of the band after searching, press ““ or “” buttons to continue search process. To stop the search process when you want, press

““ or “” buttons at any time.

Decoder (EXT-2)

You can use this mode to connect any de- coder to your TV.

•Press the““ or “” buttons to set it “On” or “Off”.

When you select Decoder(EXT-2) “On”, EXT-2 output will be chosen as TV mode only and any scrambled channels will be un- scrambled through decoder connected your TV via EXT-2 output.

Setting VCR ( Video Cassette Recorder ) Mode

•This item can be seen in TV, EXT-1, EXT-2, EXT-3 and EXT-4 modes.

•If you want to watch a VCR source from one of these modes, then it will be better to set VCR mode “on”. For this, while the cursor is

on this item press the““ or “” buttons to set it “On”.

•If you want to watch a DVD , then you must set this item “off”; because DVD is not a source like a VCR and to see the picture better, you must set the VCR mode “Off”.

- 18 -