CONNECTING PLASMA DISPLAY MONITOR TO AVC BOX
FIRST TIME USE
1.From the owner’s accessory you will find the Monitor Connector cable.
2.Firmly, and securely insert the Monitor Connection Cable to the rear panel of the AVC box “TO MONITOR” connectors.
3.Insert the other ends of the Monitor Connection Cable to the display monitor rear panel “FROM AVC” connectors.
Back of Display Monitor
Core |
To AC |
outlet |
Please use HITACHI specified cable.
TO MONITOR
Back of AVC Center
AC IN
TruBass SRS and symbol are trademarks of SRS Labs, Inc.
To AC outlet
NOTE: The Display Monitor and the AVC Center have their own AC Power. Both AC cords must be completely plugged in to the AVC Center and the display monitor, then plug them in to the AC outlets.
CONNECTING EXTERNAL VIDEO SOURCES
The front panel jacks are provided as a convenience to allow you to easily connect a camcorder or VCR as shown in the following examples:
Front panel of AVC
PHONES | INPUT 5 |
Front panel of AVC
AUDIO
VIDEO L/(MONO) R
VIDEO L/(MONO) R
NOTES: 1. Completely insert connection cord plugs when connecting to front panel jacks. If you do not, the played back picture may be abnormal.
2.If you have a
3.If you have a mono VCR, insert the audio cable into the left audio jack of your AVC box.
4.
5.If you have a VHS or 8mm camcorder, use the
14