VIDEO
Reset Video
Settings
This function allows you to Reset the Video Menu Settings of the present input and return it to the Day VIDEO mode.
Video |
| ANT A/B |
|
Picture Mode | Day | Night | |
Contrast | 100% |
| |
Brightness | 50% |
| |
Color |
| 50% |
|
Tint |
|
|
|
Sharpness | 50% |
| |
Color Temperature | High |
| |
Black Enhancement | Middle |
| |
Contrast Mode | Dynamic |
| |
Reset Video Settings |
|
| |
Move | SEL Select |
|
|
or
Video |
|
Picture Mode |
|
Select “Reset” to return the Video | |
menu Settings on this input to the | |
original | factory settings . |
| R e s e t |
Move | SEL Return |
Use CURSOR PAD or to highlight functions.
Press the SELECT button or CURSOR PAD to select Reset Video Settings.
Use the CURSOR PAD to access at the Reset softkey.
Press the SELECT button to Reset the Video Settings.
You can customize each of the Video Inputs to your preference to increase viewing performance and pleasure, depending upon the video program being viewed. If RESET is selected, only the selected Input will reset to the initial conditions as explained above.
If RESET is selected in Video:1 Input, only Video:1 Input will return to factory conditions.
Video |
| ANT A/B |
|
Picture Mode | Day | Night | |
Contrast | 100% |
| |
Brightness | 50% |
| |
Color |
| 50% |
|
Tint |
|
|
|
Sharpness | 50% |
| |
Color Temperature | High |
| |
Black Enhancement | Middle |
| |
Contrast Mode | Dynamic |
| |
Reset Video Settings |
|
| |
Move | SEL Select |
|
|
Video |
| ANT A/B |
Noise Reduction | Low | |
Auto Movie Mode | Off | |
Color Management |
| |
Color Decoding |
| |
Auto Color | Off | |
White Balance |
| |
Move | SEL Select |
|
Noise Reduction
The NOISE REDUCTION function automatically reduces conspicuous noise in the picture without degrading picture quality. Set NOISE REDUCTION to OFF if the TV experiences picture blocking.
The Auto Movie Mode function turns ON or OFF the 3:2 PULLDOWN DETECTION SPECIAL FEATURE. Auto Movie Mode Theatrical movies are shot on film at 24 frames or still pictures per second, instead of 30 frames or 60 fields
like video. When film is transferred to video for television viewing, the disparity between the two frame rates must be reconciled. This involves a process known as 3:2 pulldown.
When Auto Movie Mode is turned ON from the VIDEO menu, your Hitachi Plasma Television will activate the circuitry for this special feature to improve video performance when watching film based sources.
NOTE: When using Progressive Scan Component or HDMI OR DVI input (Ex. 480p, 720p), Auto Movie Mode will not be available (grayed out). Please see table below for additional information.
|
|
|
|
|
| ANT A/B, VIDEO, 480i | 480p/720p | 1080i |
|
| AVAILABLE | GRAYED OUT | AVAILABLE |
|
|
|
|
|
|
|
|
|
|
|
NOTES: 1. When using Progressive Scan Component, HDMI or DVI input (Ex. 480p, 720p, 1080i), Auto Movie Mode will not be available (grayed out).
2. All Video settings are independent of each other based on it’s input (ANT A/B, Input 1~5, Photo Input).
58