Hitachi 42HDX61 important safety instructions CableCARD Slot, Acquiring Data Please wait

REAR PANEL JACKS

CableCARD Slot

This slot is for the CableCARD that will be provided by your local cable operator to gain access to chosen cable channels. The CableCARD will allow you to tune digital and high definition cable channels. Please call your local cable operator if this service is available before requesting a CableCARD (also known as Point of Deployment (POD) module).

Connect a coaxial cable to ANT A terminal of the Rear Panel Jacks.

Insert the CableCARD into the slot (Top of card should be facing up as shown).

Digital Cable

Rear Panel of AVC

END

THIS

CableCARD

INSERT

FIRST TIME USE

If the CableCARD is properly installed or not installed, the TV will display the following respective screens.

CableCARD is installed OR

CableCARD

is not installed

After the CableCARD is installed, wait until the second screen below appears. The third screen below will appear if a channel is not authorized for viewing. Press the EXIT button to exit the second screen.

Acquiring Data.

Please wait.

In order to start cable service for this device, please contact your cable provider

CableCARD(tm): 123-456-789-1

Host: 123-456-789-1

Data: 123-456-789-1

UnitAddress: 123-456-789-1

Press EXIT to return

Not an Authorized Channel

Please take note of all information on the screen (you will provide this information to your cable operator). Call your cable operator and give them the information from the card to start your cable service.

NOTES: 1. A digital cable subscription is required.

2.Antenna B will not be available when CableCARD is inserted.

3.Do not insert a PCMCIA card into the CableCARD slot.

4.Please see pages 63-64 for additional CableCARD information.

13