Hitachi 42HDX61 Connecting Plasma Display Monitor to AVC BOX, Connecting External Video Sources

CONNECTING PLASMA DISPLAY MONITOR TO AVC BOX

1.From the owner’s accessory you will find the Monitor Connector cable.

2.Firmly, and securely insert the Monitor Connection Cable to the rear panel of the AVC box “TO MONITOR” connectors.

3.Insert the other ends of the Monitor Connection Cable to the display monitor rear panel “FROM AVC” connectors.

FIRST TIME USE

Back of Display Monitor

42”

Core

To AC

outlet

Back of Display Monitor

55”

Core

To AC

outlet

Please use HITACHI specified cable.

TO MONITOR

AC IN	Back of AVC Center
TruBass SRS and symbol are trademarks of SRS Labs, Inc.
	To AC
	outlet

Please use HITACHI specified cable.

TO MONITOR

Back of AVC Center

AC IN

TruBass SRS and symbol are trademarks of SRS Labs, Inc.

To AC outlet

NOTE: The Display Monitor and the AVC Center have their own AC Power. Both AC cords must be completely plugged in to the AVC Center and the display monitor, then plug them in to the AC outlets.

CONNECTING EXTERNAL VIDEO SOURCES

The front panel jacks are provided as a convenience to allow you to easily connect a camcorder or VCR as shown in the following examples:

Front panel of AVC

PHONES		INPUT 5
	S-VIDEO			AUDIO
		VIDEO	L/(MONO) R

Front panel of AVC

PHONES		INPUT 5
	S-VIDEO			AUDIO
		VIDEO	L/(MONO) R

NOTES: 1. Completely insert connection cord plugs when connecting to front panel jacks. If you do not, the played back picture may be abnormal.

2.If you have a S-VHS VCR, use the S-INPUT cable in place of the standard video cable.

3.If you have a mono VCR, insert the audio cable into the left audio jack of your AVC box.

4.S-VIDEO input takes priority over VIDEO input.

5.If you have a VHS or 8mm camcorder, use the S-VIDEO cable in place of the VIDEO cable.

14