Hitachi 42HDX61 important safety instructions Auto Adjust, Position

RGB ON SCREEN DISPLAY

AUTO ADJUST	HORIZONTAL POSITION, VERTICAL POSITION, HORIZONTAL CLOCK and CLOCK PHASE
	for current RGB format are adjusted automatically.

USING THE RGB INPUT

Setup
Auto Adjust		Adjust
Horizontal Position		0
Vertical Position		0
Horizontal Clock		0
Clock Phase		0
Reset		Reset
Input Level		0.7V
Black Side Panel		Off
Move	SEL Select

Use CURSOR PAD , cursors to highlight adjust. Press SELECT to select AUTO ADJUST.

NOTES: • Press SELECT to AUTO ADJUST the RGB mode.

•The other functions do not operate while AUTO ADJUST is in progress.

•Allow the Plasma TV to warm up for 20 minutes before performing AUTO ADJUST.

•Select a bright image for display while AUTO ADJUST takes place.

•If AUTO ADJUST terminates unsuccessfully, try AUTO ADJUST again. If AUTO ADJUST fails several times in succession, try using manual adjustment to adjust Vertical Frequency, Aspect Ratio, Timing Frequency and Picture.

•Always reset AUTO ADJUST when setting new display setting or when changing to a new external component.

H POSITION

This feature allows you to adjust the horizontal position of the display.

Setup
Auto Adjust		Adjust
Horizontal Position		0
Vertical Position		0
Horizontal Clock		0
Clock Phase		0
Reset		Reset
Input Level		0.7V
Black Side Panel		Off
Move	SEL Select

Use CURSOR PAD , to adjust the horizontal position. Press the MENU button to return to previous menu item. Press EXIT to quit.

V POSITION

This feature allows you to adjust the vertical position in RGB mode.

Setup
Auto Adjust		Adjust
Horizontal Position		0
Vertical Position		0
Horizontal Clock		0
Clock Phase		0
Reset		Reset
Input Level		0.7V
Black Side Panel		Off
Move	SEL Select

Use CURSOR PAD , to adjust the vertical position.

Press MENU button to return to previous menu item. Press EXIT to quit.

86